Author Topic: need help hacking an IDE cable (Read 993 times)

monkeybomb · « **on:** May 29, 2005, 06:11:12 pm »

I thought I knew the way the pins worked but now I'm not sure. If the red wire is pin 1 and the one touching it is wire 2 and so on, then is this the right pin layout?

2 4 6 8 10...
1 3 5 7 9...

To be more specific

If I have the red pin on the left. Would the "joymode button be the 14th wire? And would button 1 be wire 35 (or 5 from the right)?

Thanks

monkeybomb · « **Reply #1 on:** May 29, 2005, 06:16:56 pm »

oh yeah

markrvp · « **Reply #2 on:** May 29, 2005, 07:09:53 pm »

If you are using the GP-Wiz 49 with the IDE header then I believe you are right on the money.

monkeybomb · « **Reply #3 on:** May 29, 2005, 07:15:42 pm »

Dude I saw you were loged on and I knew I was close to an answer.

Thanks a lot

1.....2......3......4.....oh wait, I'll do this by myself

markrvp · « **Reply #4 on:** May 29, 2005, 07:26:23 pm »

Quote from: monkeybomb on May 29, 2005, 07:15:42 pm

Dude I saw you were loged on and I knew I was close to an answer.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: need help hacking an IDE cable (Read 993 times)

monkeybomb

need help hacking an IDE cable

monkeybomb

Re: need help hacking an IDE cable

markrvp

Re: need help hacking an IDE cable

monkeybomb

Re: need help hacking an IDE cable

markrvp

Re: need help hacking an IDE cable