Author Topic: Translucent Microswitch ButtonsTaking Pre-Orders (Read 60956 times)

Knievel · « **Reply #360 on:** July 14, 2005, 08:42:06 pm »

Hey looks good Steve, nice even glow.
Great to see someone trying one of my ideas. I had SO many people ask me for help with my lighted leaf technique and have yet to see 1 example of someone else doing it.

Patent Doc · « **Reply #361 on:** July 14, 2005, 11:00:11 pm »

Has anyone bothered to just order the white nylon nuts from Happs, drill holes in the nut and then use Knievel's leaf switch method? I'd try it, but I don't have my buttons yet.

Happs part # 53-9213-00

Patent Doc

Chris · « **Reply #362 on:** July 14, 2005, 11:12:52 pm »

Quote from: Patent Doc on July 14, 2005, 11:00:11 pm

Has anyone bothered to just order the white nylon nuts from Happs, drill holes in the nut and then use Knievel's leaf switch method?

JustMichael · « **Reply #363 on:** July 14, 2005, 11:37:24 pm »

Quote from: AlanS17 on July 14, 2005, 06:34:17 pm

Also, I've got a general question about the clear translucents... Are they crystal clear?

More like clear as glass. See the ring in the pic in this post for an example:
http://forum.arcadecontrols.com/index.php?topic=37034.msg358045#msg358045

gl.tter · « **Reply #364 on:** July 15, 2005, 05:13:34 am »

Quote from: kickngas on July 14, 2005, 08:17:10 pm

Well, here is my "very rough and rushed" portotype of the LED washers.

Chris · « **Reply #365 on:** July 15, 2005, 09:15:05 am »

Quote from: JustMichael on July 14, 2005, 11:37:24 pm

Quote from: AlanS17 on July 14, 2005, 06:34:17 pm
Also, I've got a general question about the clear translucents... Are they crystal clear?
More like clear as glass.

Scoobie · « **Reply #366 on:** July 20, 2005, 09:43:53 pm »

Quote

So clear that any flaws in the edge of your CP hole, overlay, or lexan hole are going to be visible....

Quote

For this reason, I've been trying to get in touch with Shawnzilla for 2 weeks to see about the yellows. All the other colors look great, but I'd like to hide the CP imperfections that didn't show with the standards Happs buttons.

Shawnzilla,
If you're still reading this post and selling buttons, please let us know.

Thanks!

tristan · « **Reply #367 on:** July 20, 2005, 10:21:40 pm »

I'm still waiting on yellows as well.

Goz · « **Reply #368 on:** July 20, 2005, 10:40:57 pm »

Quote from: tristan on July 20, 2005, 10:21:40 pm

I'm still waiting on yellows as well.

Ponyboy has em....

Xiaou2 · « **Reply #369 on:** July 21, 2005, 03:09:57 am »

If anyone uses clear buttons, I would expect they to paint the inner button holes black, or use a black sleeve arround the hole edge. Being so dark, you wouldnt see any imperfections. And of the sleeve method, would also be good. You could even go so far as to paint the outter edges of the button opaque if you really wanted to.

Also, if you want the best holes, grab a fostner bit set. At Harbor Freight tools they are like 40$ a set! You cant beat that : )

Spade bits work well too. But fostners are the best for the cleanest holes.

shawnzilla · « **Reply #370 on:** July 21, 2005, 08:41:29 am »

Guys, I am still around and selling buttons.

It hasn't been the greatest couple of weeks for me personally, so I apologize if I've been slow to respond to emails. I have just gone through and answered any backlogged emails.

Not sure about when I'll have the ability to order yellows yet. As I'm sure everyone knows, Ponyboy already has them in stock. I have to make quite a large minimum order from the manufacturer, whereas Ponyboy can get them locally.

I do want to say that I wholeheartedly appreciate everyone who has supported me (and continues to support me) in this endeavour. Sorry again that I've been aloof for a couple of weeks.

kickngas · « **Reply #371 on:** July 21, 2005, 12:31:34 pm »

Shawn, hope all is well. Keep up the good work and thanks for the support.

Wienerdog · « **Reply #372 on:** July 27, 2005, 02:24:19 am »

Quote from: Knievel on July 14, 2005, 08:42:06 pm

Hey looks good Steve, nice even glow.
Great to see someone trying one of my ideas. I had SO many people ask me for help with my lighted leaf technique and have yet to see 1 example of someone else doing it.

I'm with you K, I mocked up one panel and love it. My Code Freeze mini-cab will have Knievel based button lighting in a couple weeks.

RyanM · « **Reply #373 on:** August 05, 2005, 01:12:43 am »

Any more updates here? I was really interested in seeing what the results of the translucent "washer".. Did anyone try that? Any pics? Or should I just break down and get the leaf switches a-la Neon Mame style?

wintermute · « **Reply #374 on:** August 05, 2005, 07:42:59 pm »

I took Knievel's work to heart as well, (just took me a while to order all the parts) and here's what I came up with in the variety of colors of LEDs that I had available. All buttons are clear. Overall they look really good. Some of my LEDs were a little weak and looked a little washed out under "daylight" situations. From what I've seen so far I would say you need a minimum of 5,000 mcd for a good effect. Less looks good in dim or dark lighting but not with the lights on. The red is 8,000mcd, the the yellow 5,000 and the purple 3000. The other's I'm not too sure about.

For the colorblind, the colors are: Yellow, Red, Blue, Green-Blue, Pink/Purple, White, Green.

wintermute · « **Reply #375 on:** August 05, 2005, 07:44:41 pm »

Here's the red with the lights on for an idea of how it looks that way:

g1275 · « **Reply #376 on:** August 05, 2005, 07:54:47 pm »

What did you use for the semitranslucent washers? And where did you you get them?

wintermute · « **Reply #377 on:** August 05, 2005, 08:05:23 pm »

I followed Knievel's advice and went to lee valley tools for the UHWM polyethylene. http://www.leevalley.com/hardware/page.aspx?c=2&p=32045&cat=3,43576,43581

I got the 1/4" thick, worked well for drilling the 3/16" holes for the LEDs. While you're there you could also get a circle cutter which is what I used to cut the outside of the washers (inside a used a forster bit). However they have it for $26 and I got one at a local woodcraft store for $10.

Knievel · « **Reply #378 on:** August 05, 2005, 10:47:31 pm »

Wow, nice job. Those look great!

I did try my idea, using blue LED's in a blue button...

That's one FX button in the bottom left corner, surrounded by my original leafs. The pictures don't show it well but the bezel doesn't really glow all the way around like the leafs. Nice results though.
The leaf construction is just better suited for lighting. Unlit, the FX buttons look nicer. I would use them over regular Happ buttons in a second.

BTW I tryed a couple of different materials but my initial one using the lee valley poly was the best.

Weinerdog I anxiously await your mini-cab pics.

shawnzilla · « **Reply #379 on:** August 16, 2005, 05:35:21 pm »

Howdy folks!

Well, at long last I am ready to order more Blue & Clear buttons. I'd like to order yellows as well, but will only do it if I get pre-orders for at least 250 units.

Here's how pre-ordering will work:

1) Send an email to me at misterrachel@gmail.com
2) In the subject line put "Pre-Order"
3) Specify the colors you want and the quantity of each
4) Specify any accessories you want (such as LEDs)
5) Your mailing address
6) Your paypal email address

Once I've received the buttons from the manufacturer, I'll pack your orders and invoice you via Paypal.

Please do not post your pre-order to this thread as I will not count it towards my totals.

As a reminder, I currently have Orange, Red & Green buttons in stock.

Thank you to everyone for your continued support!

damono · « **Reply #380 on:** August 26, 2005, 11:06:19 pm »

Hello there Shawnzilla,

Just sent you an email RE: postage to australia for 6x red and 2x clear pushbuttons w/LED's

Thanks
damo

NIVO · « **Reply #381 on:** October 13, 2005, 12:20:59 pm »

another thing you fellas may want to look into............if y'all have a girlfriend or daughter or wife around that loves to paint their nails; look for some frosted nail polish, and wipe some on the inside of the button. If it doesnt work you can remove it with some polish remover. I dont have any of these buttons as of yet, but one of you might try it and give us some feedback here, shouldnt take more than 5 minutes to test.

Darq · « **Reply #382 on:** October 13, 2005, 09:52:07 pm »

um bad idea nivo. Nail polish remover contains acetone and will eat those buttons. Although the acetone may etch them for a frosted look in and of all by itself.

NIVO · « **Reply #383 on:** October 13, 2005, 09:59:47 pm »

well if i had one id stil try it, it can be wiped off

LPZ · « **Reply #384 on:** October 13, 2005, 10:01:52 pm »

I'd send you my last one, but shawn isn't replying to orders lately

NIVO · « **Reply #385 on:** October 13, 2005, 10:03:11 pm »

thats ok when i get around to ordering and he has some in, ill do some testing of theories i have in mind.

LPZ · « **Reply #386 on:** October 13, 2005, 10:05:39 pm »

I ordered close to a week ago....I am afraid he's not going to get back to me......and the best is I only have half of my CP done!!

shawnzilla · « **Reply #387 on:** October 13, 2005, 11:29:18 pm »

Quote from: LPZ on October 13, 2005, 10:05:39 pm

I ordered close to a week ago....I am afraid he's not going to get back to me......and the best is I only have half of my CP done!!

Hey,

Haven't forgotten about you! I've been working very long hours lately. I'm getting to all of my backorders this weekend. Sorry for the delay everyone!

LPZ · « **Reply #388 on:** October 14, 2005, 12:51:56 pm »

Kool and the Gang

shawnzilla · « **Reply #389 on:** October 14, 2005, 04:35:23 pm »

Hey Everyone,

Looks like I've got all of my outstanding orders invoiced. If you are waiting for an invoice and you live outside of the USA, I'll be sending your invoices over the weekend.

SirPoonga · « **Reply #390 on:** October 14, 2005, 04:58:27 pm »

do you have any blue buttons yet?

shawnzilla · « **Reply #391 on:** October 14, 2005, 05:16:51 pm »

Quote from: SirPoonga on October 14, 2005, 04:58:27 pm

do you have any blue buttons yet?

Yes! :-) (I'm outta reds though)

NIVO · « **Reply #392 on:** October 14, 2005, 06:24:55 pm »

another idea for frosting of buttons.................they make contact paper that has a smeared,frosted look to it. I know alot of you have this either in your home or have seen it. It is the material used to apply to a shower window in your home for privacy. i figure a small disc piece cut from it can be tucked into the inside of the button. Again I dont presently have any of the buttons but if someone has the material on hand and spare button to test, please post your findings, as im trying to help the creative process as well. thx.

SirPoonga · « **Reply #393 on:** October 17, 2005, 11:24:45 am »

grrr, I need 1 red and 1 blue one....

shawnzilla · « **Reply #394 on:** October 17, 2005, 11:08:40 pm »

Quote from: SirPoonga on October 17, 2005, 11:24:45 am

grrr, I need 1 red and 1 blue one....

:-) Never fear, I'm ordering more...and I can probably swing one red for you if you need it now.

SirPoonga · « **Reply #395 on:** October 18, 2005, 01:44:04 am »

Nah, just update the thread when you get more in.

LPZ · « **Reply #396 on:** October 18, 2005, 12:35:33 pm »

chicken


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Translucent Microswitch Buttons*Taking Pre-Orders* (Read 60956 times)

Author Topic: Translucent Microswitch ButtonsTaking Pre-Orders (Read 60956 times)