Author Topic: need pinout for electrohome g07cb0 38-g07-904-00 (Read 3020 times)

rob1234 · « **on:** April 27, 2005, 04:31:10 pm »

I need the pin out and manual if possible for a 19 inch electrohome g07cb0 38-g07-904-00. Is this a good monitor to use with a vga? I have little knowledge about arcade monitors...I know how to discharge them but that is about it. How do I connect the power supply to the monitor? I do have to use an arcade power supply correct? Also I have an isolation transformer on order, how would I connect that?

Ken Layton · « **Reply #1 on:** April 27, 2005, 07:16:17 pm »

That's the standard G07 monitor. You can download the manual at atarijeff.com

This monitor requires the use of an isolation transformer. Bob Roberts has some hookup diagrams on his site.

rob1234 · « **Reply #2 on:** April 28, 2005, 12:17:17 am »

can anyone give me a link to the bob roberts site?

Ken Layton · « **Reply #3 on:** April 28, 2005, 02:16:50 am »

www.dameon.net/BBBB/


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: need pinout for electrohome g07cb0 38-g07-904-00 (Read 3020 times)

rob1234

need pinout for electrohome g07cb0 38-g07-904-00

Ken Layton

Re: need pinout for electrohome g07cb0 38-g07-904-00

rob1234

Re: need pinout for electrohome g07cb0 38-g07-904-00

Ken Layton

Re: need pinout for electrohome g07cb0 38-g07-904-00