I've got a bunch of old circuit boards for sale, but would rather you guys buy 'em than put them on ebay. Make offers on the boards. I'm also interested in trades, especially if anybody has an Oscar Controls v2 Spinner

(list at bottom of this post).
Here's what I have (that I can identify):
1x Rally-X boardset. If I remember correctly, this worked when pulled (was in a mini-cab that a friend converted to something else, not my choice tho

). *SOLD to paigeoliver*
2x Konami KT-5207-IB/KT-5112-2B boardset (Timepilot, I have a cab for these too, but in pretty beat up shape, monitor is dead, and I have no time to fix it. I had bought new sideart & marquee for it, but not sure if I can find it all now) Both of these boardsets worked fine in the cabinet before the monitor went out
1x Konami GX-388 boardset (Time Pilot 84) This was also compatibl with the TP cabinet above, and worked fine (with the exception of the regular TimePilot cab not having a 2nd fire button, required for TP84, NO I did NOT hack the TP control panel to add another button).
1x Wizard of Wor boardset (not 100% sure it's complete, no cage at any rate) list of boards included follows:
CPU Board
Memory board (some chips are missing, not sure if they were ever populated)
3x Ram Cards
1 RGB Interface card (was told at the time they are almost impossible to find, ymmv tho) *SOLD to dougmanct*
1x Midway Medium Power Supply 70VA (From a Bosconian, 99.9% sure of that) Has some places it looks like have been heated, but fuses & parts all look ok.
2x Bosconian Filter PC boards. Most likely good.
2x Atari Regulator/Audio 2 boards, not sure what they came out of (Tempest?) Has connections at both end of the boards, and both ends of boards are fully populated.
1x Atari Regulator/Audio 2 board, no parts on one side. Not sure what it came out of at all, only has 3 connection points, instead of the 5 on the boards above.
1x RGB Convertor board (labeled a DY-I-O, other markings 85X0311 P600. I think this was to convert a Composite signal to a arcade monitor signal, has a BNC connector on one end, and a arcade monitor output on the other)
I also have a Centuri board I'd like to ID if anybody can help, I'm pretty sure it's a Phoenix (I hope so, I have a good condition Phoenix cocktail cab I'd like to rebuild, was one of my favorites), anybody got a picture of a Phoenix boardset they'd share?
There is one other board I have no idea what it is, build by Sun Electronics Corp, labeled a TVG-1-CPU-B & TVG-1-VIDEO-B. Don't know what it came out of. Condition looks excellent though.
I'll try to get pictures of all these boards later today, if I can arrange to borrow a digital camera, if not, I'll get ours from work and do it tomorrow night.
Bosconian Parts & Operating Manual (Spiral bound)
Mortal Kombat 1 Kit manuals (with some misc stuff in the packet)
Centipede Signature Analysis Guide, Operation Maint & Service manual, And both drawing sheets (schemetics) (I THINK this is the full booklet set for this game, seems to be complete)
Black Knight Pinball instruction Booklet
Super Cobra Schemetics
Stargate Instruction manual (Williams upright on the cover)
Bally/Midway's MCR System Games Standardized General Instructions (also has many monitor schemetics in it)
Timepilot Service manual, TimePilot 84' Conversion kit instruction manual & some other misc sheets (looks like there is also a Tutankamen booklet in that pack). (These will be sold with the other boards &/Or cabinet)
Stuff I'm looking for:Oscar Controls v2 Spinner
27" arcade monitor (yeah I know it's a stretch, but maybe we can make a deal

).
NOS 4" Wico joysticks, blue ball handle, 8 way (alternately, Ultimarc T-Stick w/Blue handles, need 2)
Someone to design me a CPO, sideart & Marquee

(I love Motorfish's design)
Anything else I need for my own home-built cabinet

.