T molding and timber size

[Craig]

I have been using 18mm MDF building my cabs. I saw on www.tmolding.com they have 3/4" t molding which is 19.050mm wide.
Now, has anyone used this on their 18mm thick cabs? Do I go ahead and order a few feet and then scrape off the excess t molding with a blade when fitted to the MDF? Has anyone done this?

Thanks! :-)

[Franco]

I used 18mm MDF on my cab and also used 3/4" t-moulding. If you get the groove dead centre you are only going to get a 0.5mm overhang which is sod all really. I think the v.slight overhang gives it a nice look too.

[Craig]

Is it noticable? Would I bother cutting it?

[Franco]

I didnt bother cutting mine. I think you may run the risk of creating an uneven edge if you trim it. It also depends on what type of t-moulding you are using. I used foil covered chrome t-moulding and if i trimmed it it would have reveled the clear plasic beneath it.

This is a pic of the t-moulding on mine. Ill see if I can get a better close up pic of the overhang, but honestly I dont think you'll notice it.




I could always send you a short strip of my left over t-moulding, that way you could check the overhang yourself.

[Craig]

I could see how you could make an uneven edge. I was thinking about using the rounded t mold not the flat. I was going to use black 3/4 for my Pac man themed cabinet and Green (Galaxian matched) 3/4 for my Galaga themed cabinet for a friend all from tmolding.com.

I will just go ahead with it. 0.5mm isn't much I guess.

Thanks

[Franco]

No problem. 

You could always ask for them to send you a sample.

[Craig]

No problem. 

You could always ask for them to send you a sample.

I would, but I'm another Australian here 

[Franco]

No problem.

You could always ask for them to send you a sample.

I would, but I'm another Australian here

Ahh I see, I aint aussy tho, Im a pom!!

[Craig]

Yeah. These 33/32 69/19 it's like Chinese to me. Just give it to me in mm man, just mm ok?

The American's do everything differently to everyone else of course.

Oh yeah, maybe I should start calling it moulding and NOT molding because that's how American's call it. Just like color and colour etc.. 

[Craig]

Oh, just had a thought. I heard on the radio the other day that the US people were changing color to colour. IS THIS TRUE ANYONE?

[Franco]

Ha ha, dont think we should start a Yank bashing here my barbeque-esque buddy, I doubt this forum would even be here if it wasnt for our US friends. 

(un)fortunetly I work in engineering and have to use both metric and imperial measurements every day so it is not too alien to me.

Saying that I do prefer metric! 

[Craig]

I wasn't trying to start any Yank bashing at all!

True about the forum not being here unless for them though.

Talking about a BBQ, I'm hungry and it's six past nine at night Saturday 

[Franco]

Chuck a shrimp on for me will ya? 

[Craig]

Will do. I got the picture enlarged when I viewed it outside the board. I need not to worry about the 0.5 mm I don't think.

[Craig]

Btw, that CP looks pretty wild. The chrome joys look very cool.

[Franco]

Thanks. I made them at work to replace the ---smurfy--- standard black Happ rotary handles. The only thing was as they are solid stainless, they didnt always spring back to the center due to the weight of them and the angle of the CP. Ive since made some polished aluminnium ones to replace them which has solved the problem nicely and are even more shiny! 

[Kremmit]

Oh, just had a thought. I heard on the radio the other day that the US people were changing color to colour. IS THIS TRUE ANYONE?

I certainly haven't been notified of the spelling change.  Did you hear that on April 1, perhaps?

Of course, nobody in the US knows how to spell anymore, anyway, so it wouldn't really matter.  There is a sign across the street from me advertising the things at a garage sale- anybody want to buy a "Wate Set"?  Every day, I drive past these three signs:  "We Sale Soda & Snacks", "Sorry We'er Close", and my personal favorite (it really tells a story) "Slow Childern and Dogs".