My buttons, joysticks, and trackball arrived today, and I was getting ready to put them on a test piece of plywood to make sure everything would fit nicely when I thought of two items.
1. Is there a way to hook up two cables when using a quick disconnect piece? When I say this I mean, like if you are daisy-chaining all the grounds so you have one wire coming in and one wire leaving from the same connector on the switch. Is it possible to fit both of those in a standard female .125 quick disconnect piece?
2. If you are running a 4 player control panel with 40 buttons, 5 joysticks, and a trackbal, can one ground daisy-chained between all of those buttons really handle that much? I mean, I know optimally you should run a unique ground from every switch, but that becomes a nightmare. Should I run like 5 different sets of grounds, or will the 1 be enough?
3. (Yes I know I said I only thought of two, but I just thought of another) I plan on making this CP useable with a cabinet I plan on building in the future with a larger monitor. Therefore, I want to be able to disconnect the CP and be able to move it to another cabinet in the future. What are your recommendations for this? Acquire a few molex connectors?
Also, where if anywhere would soldering be preferable or advantageous?
Thanks for all the continued advice and help. I really appreciate the assistance in making this building process much more fun and less painful.