Author Topic: Faint colors on kortek (Read 1309 times)

Paladin · « **on:** April 03, 2005, 08:16:15 pm »

I've got a 19" monitor that is labeled Videomaster, but it matches the Kortek K1-2-V0 on Bob Robers site and the Betson Imperial manual.

dabone · « **Reply #1 on:** April 03, 2005, 10:45:03 pm »

Bad amp or hooked up incorrectly.

Are you running composite or seperate syncs?

Later,
dabone

Paladin · « **Reply #2 on:** April 03, 2005, 11:56:28 pm »

The breakout is setup for composite, and I tried the amp both ways with no change.

Paladin · « **Reply #3 on:** April 07, 2005, 11:50:52 am »

Anybody else have any ideas?

Ken Layton · « **Reply #4 on:** April 07, 2005, 06:40:20 pm »

Try adjusting the three pots next to the video input connector on the Kortek main board.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news