Author Topic: FS: Galaxian Project in N. Dallas (Read 1779 times)

Chemixtry · « **on:** March 31, 2005, 07:20:17 pm »

I bought this cab with the intent of restoring it. I have too many arcade projects so I am goning have to let this go. Its a Macho Mouse that started its life as a Galaxian. The art was wrecked on the front and side so I removed it down to the wood. The right side still has the art but it was painted over. I havent tried to remove it. It comes with the Macho Mouse control panel, marquee, and pcb (I dont know if it works). It didnt have a coin door when I bought but I have since bought a Midway coin door that you can see in the picture. There is no monitor or back door. The cab is in great shape with no water damage. Like the title says I am in N. Dallas

$100

Chemixtry · « **Reply #1 on:** March 31, 2005, 07:21:49 pm »

the other side.....

Raven.. · « **Reply #2 on:** March 31, 2005, 11:28:15 pm »

I've seen this one...it's a pretty nice cab overall.

Raven.. · « **Reply #3 on:** April 03, 2005, 08:43:42 pm »

Chemixtry · « **Reply #4 on:** April 06, 2005, 06:30:50 pm »

tmasman · « **Reply #5 on:** April 08, 2005, 06:30:30 pm »

Quote from: pinballjim on April 08, 2005, 06:08:00 pm

You try listing it on RGVAM? Someone in the area might give you $5 or so for it.

Heck... I'd be willing to pick it up for $10.

(I actually would, but I wasn't going to disrespect your initial asking price with such a low-ball offer).

- tmasman
Arlington, TX

Chemixtry · « **Reply #6 on:** April 08, 2005, 07:33:38 pm »

Yeah I know I was a bit optimistic...never hurts to try.

I will probably thow it up on ebay and see what it goes for. I know it may not be much but I'm sure I can get more then $5.

tmasman · « **Reply #7 on:** April 08, 2005, 07:39:01 pm »

Quote from: Chemixtry on April 08, 2005, 07:33:38 pm

I know it may not be much but I'm sure I can get more then $5.

I know!!!
I'll give you $10!
($15 if I must...)

Chemixtry · « **Reply #8 on:** April 08, 2005, 07:42:28 pm »

Quote

I know!!!
I'll give you $10!

lmao
You must be able to afford more than that after selling that Killer Instinct pcb&drive.

tmasman · « **Reply #9 on:** April 08, 2005, 07:50:41 pm »

Quote from: Chemixtry on April 08, 2005, 07:42:28 pm

Quote
I know!!!
I'll give you $10!
lmao
You must be able to afford more than that after selling that Killer Instinct pcb&drive.

Hm...
Actually I'm using that money to fund some other projects. But I might actually bump my price up to $20 if the coindoor & CP come with it... Come on... Don't make me go any higher...

Witchboard · « **Reply #10 on:** April 08, 2005, 09:20:10 pm »

Keep it up Chemixtry, you'll have him up to $100 before you know it.

markrvp · « **Reply #11 on:** April 08, 2005, 09:33:28 pm »

Please check your Personal Messages.

tmasman · « **Reply #12 on:** April 08, 2005, 11:46:40 pm »

Quote from: markrvp on April 08, 2005, 09:33:28 pm

Please check your Personal Messages.

Aww.... come on... he was about to crack... I could feel it!

markrvp · « **Reply #13 on:** April 12, 2005, 01:35:58 pm »

Any interest in PM?

ngf74 · « **Reply #14 on:** April 12, 2005, 09:52:43 pm »

I'm a newb, so I don't want to tear up anything decent until effort 3 or 4. I in your area, and I'll give you $30.

Nannuu · « **Reply #15 on:** April 12, 2005, 11:19:19 pm »

Dang it Chemixtry! I keep looking at this but then I look in my garage at the tons of untouched cabinets $:-\$ .

Chemixtry · « **Reply #16 on:** April 13, 2005, 01:34:09 am »

Thanks for the interest - the Galaxian is sold

Raven.. · « **Reply #17 on:** April 13, 2005, 01:37:05 am »

Quote from: Nannuu on April 12, 2005, 11:19:19 pm

Dang it Chemixtry!

Raven.. · « **Reply #18 on:** April 13, 2005, 11:52:14 pm »

Quote from: Chemixtry on April 13, 2005, 01:34:09 am

Thanks for the interest - the Galaxian is sold

And it looks really nice in my garage. You can come visit it, if you want Nannuu.

Raven.. · « **Reply #19 on:** April 18, 2005, 01:43:03 am »

Just a little update for no reason. Here is the former Macho Mouse....now a 3-in-1 Ms Pac/Galaga/Frogger. I have the marquee designed, it just needs to be printed and I am going to replace the old T-molding with white pine roll trim (neat stuff!) to complete the "naked" look.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news