Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Soldering Iron  (Read 1200 times)

0 Members and 1 Guest are viewing this topic.

Franco

  • Guest
  • Trade Count: (0)
Soldering Iron
« on: March 30, 2005, 01:25:27 pm »
Right its about time I bought a soldering iron as I need to hack some N64 ports.

As always, ebay is worth a look for such purchases.

A quick search brought up this:-

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=28057&item=4368245751&rd=1

Do you think it will be decent enough? Bear in mind its only once in a blue moon I will need to do some soldering. Or is it worth spending a little more and getting a higher quality one?

Im after a iron, stand and desoldering pump.

Any advice would be great!

bowza

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 41
  • Last login:July 08, 2005, 03:04:35 pm
  • I want to build my own arcade controls!
Re: Soldering Iron
« Reply #1 on: March 30, 2005, 01:44:43 pm »
Given that you are asking the question I take it you have not done much soldering / de soldering.

That will be fine for most wire jobs.

I would not like to use it on ic components etc

But yes it will do for those once in a blue moon jobs.

Regards

Bowza

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:August 18, 2025, 10:59:20 pm
  • There's my post
    • RayB.com
Re: Soldering Iron
« Reply #2 on: March 30, 2005, 01:58:07 pm »
I still use the cheap $7 Radio Shack iron I bought 10 years ago.
NO MORE!!

cholin

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:July 16, 2009, 09:22:25 pm
    • Nilok Productions
Re: Soldering Iron
« Reply #3 on: March 30, 2005, 03:11:34 pm »
Yeah Im gonna have to say go Radioshack if you have it.  I don't support them at all, but if you can just drive there and pick one up for <10 bucks, then its no big deal where you get it.  Look for ~15watts because those were made for ICs and electronics.  Higher wattages irons (and guns) are made more for connecting metal.

JoyMonkey

  • Voodoo Wiki Master . . .
  • Wiki Master
  • Trade Count: (+5)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 2899
  • Last login:June 16, 2025, 09:16:27 pm
  • Candy is Dandy but Liquor is Quicker
    • JoyMonkey.com
Re: Soldering Iron
« Reply #4 on: March 30, 2005, 03:32:51 pm »
If you're in the UK it'll be hard to find a RadioShack. Find your nearest Maplins Electronics and take a look at them. You can pick up a good quality soldering kit for 20squid. That one on eBay is most likely junk.

Stingray

  • Official Slacker - I promise to try a lot less
  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10463
  • Last login:April 08, 2021, 03:43:54 pm
Re: Soldering Iron
« Reply #5 on: March 30, 2005, 03:41:49 pm »
I still use the cheap $7 Radio Shack iron I bought 10 years ago.


Me too.

-S
Stingray you magnificent bastard!
This place is dead lately.  Stingray scare everyone off?

Craig

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 236
  • Last login:September 29, 2014, 05:51:56 am
    • Creation on the Web
Re: Soldering Iron
« Reply #6 on: March 30, 2005, 06:40:45 pm »
Looking at that soldering iron, the tip looks sort of big. Avoid getting irons with big tips. They are a pain to properly solder with.
I love the life I lead. I wish I could afford it.

ShinAce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 152
  • Last login:January 16, 2007, 07:38:14 pm
  • Building the unbuildable since 2001
Re: Soldering Iron
« Reply #7 on: April 02, 2005, 08:17:38 am »
That iron will do fine for jobs with bigger pieces.
If you want to solder fine wires and components(resistors, caps, ...), you'll need something with a fine tip and less heat than 30 watts. Maybe 25, preferably 20.
An ounce of image is worth a pound of performance.

Craig

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 236
  • Last login:September 29, 2014, 05:51:56 am
    • Creation on the Web
Re: Soldering Iron
« Reply #8 on: April 02, 2005, 08:44:02 am »
I should also add that buying a good brand temp controlled one is a good idea too. It would likely last you the rest of your life if you don't use it every day ;-)
I love the life I lead. I wish I could afford it.