Author Topic: Quick help on optical rotary (Read 1787 times)

cdbrown · « **on:** November 11, 2002, 01:03:12 am »

Hi all,

Was trying to take apart the Happs optical rotary I received last week but couldn't get it apart. I removed the clip at the base, encoder wheel but the shaft still wouldn't come out. There is a plastic spacer underneath the base that won't move and looks like it's got some type of fasteners in it. I think it need small alan key or similar. Does anyone know if this is right and what size I need. The keys I had were all way too big and I couldn't even fit a srew driver in there. I do have smaller screwdrivers which I might try tonight if I don't get a response.

Cheers
-cdbrown


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news