Author Topic: ArcadeVGA WinXP installation ?? (Read 980 times)

vader · « **on:** March 03, 2005, 03:22:41 pm »

See my previous thread for my problems. After tonite if it comes down to having to reinstall XP. What is the exact proper procedure for doing it, step by step.....install card, then xp, vice versa and so on and does anyone know the proper keypresses to get windows to install, I am under the assumption that half the screen will be missing initially till drivers are installed...

Tim

Will · « **Reply #1 on:** March 03, 2005, 03:33:55 pm »

Set your bios to boot from cd rom,than with winxp cd drive boot computer.

To install AVGA ,first install card ,after boot when windows says it needs to install drivers cancel that.Than install drivers from ultimarc website not the one on CD.Hope this helps.

vader · « **Reply #2 on:** March 03, 2005, 03:42:49 pm »

alright Will......I'll do that tonite......should I have the arcade monitor hooked up during the whole process ?

Tim

Will · « **Reply #3 on:** March 03, 2005, 04:16:15 pm »

Should be fine to have the arcade monitor hooked up,but you may not be able to read your bios.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: ArcadeVGA WinXP installation ?? (Read 980 times)

vader

ArcadeVGA WinXP installation ??

Will

Re: ArcadeVGA WinXP installation ??

vader

Re: ArcadeVGA WinXP installation ??

Will

Re: ArcadeVGA WinXP installation ??