Author Topic: Rotary joystick questions (Read 688 times)

ripzone · « **on:** February 27, 2005, 05:42:18 pm »

1) Some time ago I saw a DIY rotary interface board that was developed by an BYOAC member.

Since its easy to do I decided I would do it and save 45$ for the druin's interface.

I already have the components, pcb but I dont seem to find the programming code for the ATMEL controller that is used.

Does anyone have it?

2) In the next CPO im planning I thought I would place a 8-way Mechanical Rotary for the P1 and a Optical rotary for the P2. What do you think?

3) Should I get an LS-30 original SNK joy or just stick with the Happ's one?

Thanks!

OLD THREAD: http://forum.arcadecontrols.com/index.php?board=1%3baction=display%3bthreadid=14166


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Rotary joystick questions (Read 688 times)

ripzone

Rotary joystick questions