Author Topic: Bezel/plexi mounting question.. (Read 1004 times)

the3eyedblindman · « **on:** February 22, 2005, 08:52:51 pm »

Does anyone know how to mount these without having any screws visible? Whenever I see bezels on real arcades there is no indication on how they are attached, and you cant see any screws. Just wondering, please help, thanks.

Crazy Cooter · « **Reply #1 on:** February 22, 2005, 09:31:43 pm »

If you have a black border, just put velcro on the back where it rests on the rails.

Slot the sides of the cab.

Slot the rails it rests on (so it rests in the rails).

??

Tailgunner · « **Reply #2 on:** February 23, 2005, 02:38:19 am »

The plexi monitor overlay/bezel are usually held in place by the control panel at the bottom. The top edge is held by a groove routed in the cab. On the back side, the monitor opening is framed with 3/4" x 3/4" wood strips. The setup allows you to quickly remove both the bezel and overlay by unlatching the control panel, then lifting them out by the bottom edge.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Bezel/plexi mounting question.. (Read 1004 times)

the3eyedblindman

Bezel/plexi mounting question..

Crazy Cooter

Re: Bezel/plexi mounting question..

Tailgunner

Re: Bezel/plexi mounting question..