Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: FS: complete Jamma "kit" with wiring and new controls.  (Read 926 times)

0 Members and 1 Guest are viewing this topic.

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
FS: complete Jamma "kit" with wiring and new controls.
« on: February 19, 2005, 03:35:25 pm »
I pieced this together from spares.

Complete cabinet AC wiring with interlock switches, on/off switch, ISO and working power supply.
Brand new bob roberts JAMMA harness
2 brand new Happ joysticks
6 brand new happ buttons
2 new happ start buttons.

I can add a coin door if you need one.

Basically this is everything (save monitor) to turn that home built cabinet (or gutted cabinet) into a JAMMA cabinet. The AC wiring is complete and hooked up (including power cord), the JAMMA harness is new and will have to be installed (which is easy, all the wires are labeled). All you will need to add is a monitor.

Make an offer.
Logged
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.
Pages: [1]
  
Go Up
« previous next »