Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wanting to use Serial Mad Catz Analog Pedals by themselves, need info  (Read 1089 times)

0 Members and 1 Guest are viewing this topic.

Projekt Produkt

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:September 29, 2015, 04:41:24 pm
  • I build custom controllers to your specs.
    • Projekt Produkt
I've got a set of serial port Mad Catz racing pedals.  I'm assuming they went with the Analog Mad Catz steering wheel.  I'd like to find a driver to make them work alone.  I've been all over the web looking for info and drivers for them and have come up dry.  Anyone using these pedals or have a driver for them?

Thanks everyone;
Kevin
Owner, Designer, Engineer, etc.  of Projekt Produkt .com

menace

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2565
  • Last login:November 08, 2024, 01:49:35 pm
Re: Wanting to use Serial Mad Catz Analog Pedals by themselves, need info
« Reply #1 on: February 16, 2005, 07:24:14 am »
you'll likley have to hack them to a joystick to get them to register properly--find an el-cheapo usb joystick and hack the pedal to the x and y pots respectively or if you have two sets--hack one set to x and the other to y
its better to not post and be thought a fool, then to whip out your keyboard and remove all doubt...

IMMark

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 94
  • Last login:August 05, 2016, 07:30:02 pm
  • I want to build my own arcade controls!
Re: Wanting to use Serial Mad Catz Analog Pedals by themselves, need info
« Reply #2 on: February 16, 2005, 09:05:18 am »
I think that you could wire them through an AKI, and get them to work ???