Author Topic: help getting optical joystick to work with x-arcade (Read 1016 times)

pergradegundam · « **on:** February 08, 2005, 06:02:32 pm »

hi, i was told by one of the guys from SlikStik that this forum would help me with the problem im having...

the problem is: on my 2-player x-arcade stick, i just installed a HAPPS P360 joystick to the 1-player side, now the only thing left is where to plug in the 5+ volt wires into the motherboard on the x-arcade control panel... can someone please show me a diagram or help me in any other way?

thank you very much in advance ^__^

BobA · « **Reply #1 on:** February 09, 2005, 01:06:55 pm »

Did you try asking the guys at X-arcade about where to get your 5V? They have been rather closed mouth about their interface but maybe a DVM could help sort it out.

BobA

ShinAce · « **Reply #2 on:** February 09, 2005, 06:34:43 pm »

Can't be too hard to figure out.

Look at where the wires from the cord attach to the pcb. You'll find a small can type capacitor between 2 of the wires. Those 2 wires are ground and power. Done...and done.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: help getting optical joystick to work with x-arcade (Read 1016 times)

pergradegundam

help getting optical joystick to work with x-arcade

BobA

Re: help getting optical joystick to work with x-arcade

ShinAce

Re: help getting optical joystick to work with x-arcade