Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Coin Mech problem  (Read 1303 times)

0 Members and 1 Guest are viewing this topic.

CIA_Guy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 81
  • Last login:January 01, 2025, 10:33:10 pm
  • You mean there are games other than Defender?
Coin Mech problem
« on: January 23, 2005, 07:23:45 pm »
I've got an original Defender coin door, but it's missing the mechanisms.
Logged

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: Coin Mech problem
« Reply #1 on: January 23, 2005, 07:32:20 pm »
Had to go check my Defender door (just a bare door, not on a cab) and I have no idea where that part is.  I suspect I'm missing it as well.
Logged

CIA_Guy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 81
  • Last login:January 01, 2025, 10:33:10 pm
  • You mean there are games other than Defender?
Re: Coin Mech problem
« Reply #2 on: January 23, 2005, 07:56:57 pm »
The mechs don't seem to reliably drop the coins through, so I think the missing part holds everything in place a little better.  This is one of the silver doors, so it might be a little different on the inside than the black doors...you never know!  The mech work perfectly in another door, so I know they aren't the problem. 
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Coin Mech problem
« Reply #3 on: January 23, 2005, 10:55:41 pm »
It's a common Williams pinball part. You want Williams part number 1A-4253 Rejector Locking Plate. Order it from www.pbresource.com
Logged

CIA_Guy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 81
  • Last login:January 01, 2025, 10:33:10 pm
  • You mean there are games other than Defender?
Re: Coin Mech problem
« Reply #4 on: January 24, 2005, 08:23:38 pm »
Quote from: Ken Layton on January 23, 2005, 10:55:41 pm
It's a common Williams pinball part. You want Williams part number 1A-4253 Rejector Locking Plate. Order it from www.pbresource.com

Thanks for the info...I went to the site and tried to locate the part....I couldn't find a search function, but I sent an email.  I might pick up a few other parts when I make the order.

Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Coin Mech problem
« Reply #5 on: January 25, 2005, 06:14:36 pm »
It's not on the site. There's a lot of stuff not on the site. You have to contact Steve either by phone or email with part numbers in hand.
Logged
Pages: [1]
  
Go Up
« previous next »