Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Need help with selecting trackball parts..  (Read 1127 times)

0 Members and 1 Guest are viewing this topic.

hitandrun

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 27
  • Last login:August 03, 2010, 10:13:08 pm
Need help with selecting trackball parts..
« on: January 23, 2005, 10:54:27 am »
I've been searching around the forums, and can't find all the info I need, so I thought I would ask.
Logged

NoOne=NBA=

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2718
  • Last login:July 23, 2011, 08:59:16 am
  • Just Say No To Taito! -Nichibutsu
Re: Need help with selecting trackball parts..
« Reply #1 on: January 23, 2005, 03:41:13 pm »
The BALL doesn't actually stick up any farther than the regular 3".

It's a high LIP trackball, meaning that the surrounding LIP on the base is taller than the standard ones.
This is to accomodate putting plexi over the graphics--as opposed to the regular lip going on a Centipede or Crystal Castles with only a thin backprinted overlay.
Logged

hitandrun

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 27
  • Last login:August 03, 2010, 10:13:08 pm
Re: Need help with selecting trackball parts..
« Reply #2 on: January 23, 2005, 09:38:04 pm »
OK... makes sense now... Thanks for the reply!
Logged
Pages: [1]
  
Go Up
« previous next »