Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: How Should I Wire This?  (Read 1241 times)

0 Members and 1 Guest are viewing this topic.

sasuke_kun12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • Last login:March 10, 2009, 09:05:13 pm
  • Its been to long... I'm never leaving this place!
How Should I Wire This?
« on: January 23, 2005, 01:04:06 am »
How should i attack it? and whats that black thing in the middle ( i know it's the ground but can i file it down to expose some copper?)

image here
http://www.freewebs.com/emily_fan/IMG_1281.JPG
Logged
Why are all the good, cheap lowboys in brisbane?

krick

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2006
  • Last login:May 23, 2025, 03:48:36 am
  • Gotta have blue hair.
Re: How Should I Wire This?
« Reply #1 on: January 23, 2005, 01:16:04 am »
Uh, the "black thing in the middle" is a chip covered in a drop of epoxy.

If you "file it down" you will render the whole circuit board useless.
Logged
Hantarex Polo 15KHz
Sapphire Radeon HD 7750 2GB (GCN)
GroovyMAME 0.197.017h_d3d9ex
CRT Emudriver & CRT Tools 2.0 beta 13 (Crimson 16.2.1 for GCN cards)
Windows 7 Home Premium 64-bit
Intel Core i7-4790K @ 4.8GHz
ASUS Z87M-PLUS Motherboard

penjuin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 47
  • Last login:February 23, 2011, 03:51:58 pm
  • The penjuins are coming...
Re: How Should I Wire This?
« Reply #2 on: January 23, 2005, 01:18:47 am »
The black thing in the middle is not GND, but actually a processor, ie Don't file it down!

Also, if you have presicion soldering skills then you can easily solder two legs of a microswitch (through wires of course) and it should work. Please correct me if I am wrong, im still waiting for my parts to get mailed to me.
Logged

penjuin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 47
  • Last login:February 23, 2011, 03:51:58 pm
  • The penjuins are coming...
Re: How Should I Wire This?
« Reply #3 on: January 23, 2005, 01:19:19 am »
oops, there was a post while i was writing mine! sorry!
Logged

sasuke_kun12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • Last login:March 10, 2009, 09:05:13 pm
  • Its been to long... I'm never leaving this place!
Re: How Should I Wire This?
« Reply #4 on: January 23, 2005, 01:34:10 am »
um i kinda half filed it i.e i filed abit off the top
Logged
Why are all the good, cheap lowboys in brisbane?

quarterback

  • King Of The Night Time World!
  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3089
  • Last login:February 26, 2025, 12:22:43 pm
Re: How Should I Wire This?
« Reply #5 on: January 23, 2005, 02:03:02 am »
Quote from: lp_maniac on January 23, 2005, 01:34:10 am
um i kinda half filed it i.e i filed abit off the top


Hmmm... do you see scraped epoxy or do you see a scraped IC?
Logged
No crap, don't put your kids in a real fridge.
-- Chad Tower

sasuke_kun12

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • Last login:March 10, 2009, 09:05:13 pm
  • Its been to long... I'm never leaving this place!
Re: How Should I Wire This?
« Reply #6 on: January 23, 2005, 02:19:15 am »
i saw epoxy anywaz i screwed the pcb up i plugged it in my pc and it said malfunctioned device
Logged
Why are all the good, cheap lowboys in brisbane?
Pages: [1]
  
Go Up
« previous next »