Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: T-Stik: Fixing holes  (Read 1828 times)

0 Members and 1 Guest are viewing this topic.

Aqualung

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17
  • Last login:October 25, 2002, 08:44:35 am
  • Hi-quality Brazilian disaster
T-Stik: Fixing holes
« on: October 16, 2002, 07:38:04 am »
Hi ;D

I bought a T-Stik from Andy's site but it didn't arrive yet (some trouble with Customs officials.  >:( ), but I have already designed my CP on a spare piece of wood with an old stick I had lying around, but I'm sure that the fixing holes don't have the same measures as the T-Stik.

The problem is: I've started to work on the final CP but I don't have these measures (but I already know where it wiil stay), so if anyone who have a T-Stik could tell me the measures for these fixing holes, it'll be very appreciated.

Thanks in advance.