Author Topic: Starwars Yoke Repros (Read 2336 times)

Kremmit · « **on:** December 16, 2004, 12:45:39 am »

Check this out:
http://www.westcontrols.com/files/products_controls1.php?cat=C6YO&type=XFY

They've got repro yokes, in both geared and gearless flavors.

Price may be a bit steep, though.

Bones · « **Reply #1 on:** December 16, 2004, 01:06:24 am »

Looks good. Your not wrong about the price though....

Tailgunner · « **Reply #2 on:** December 16, 2004, 01:29:46 am »

For that price I'd expect the rest of the cab including a working vector monitor to be included.

Generic Eric · « **Reply #3 on:** December 16, 2004, 06:55:19 am »

from the website:

This price DOES NOT INCLUDE an adapter

Minwah · « **Reply #4 on:** December 16, 2004, 07:10:55 am »

What makes you think their repros? Seem & look like originals to me:

Fully restored with original components and has the same angle as the upright cabinets.

Anyone know what the angle used is? Looks like ~30deg from horizontal.

And jeepers, I was expecting a coupla hundred dollars but

And the adaptor alone is 50 or 70 bucks!

Crap pictures on the site as well, you'd think they could do better than that. Looks to me like they're using the artwork from the vector arcade art library - I think the textured effect is slightly different to the original (don't quote me on that tho).

menace · « **Reply #5 on:** December 16, 2004, 07:21:20 am »

This guy might as well make them from gold--what kind of dumba$$ charges those prices

You know what this says to me--"I think guys that buy this stuff are so stupid, they'll pay any price just to have one" Its almost funny to think that he thought he was pricing competitively...

Lilwolf · « **Reply #6 on:** December 16, 2004, 07:36:41 am »

The gearless one I'm assuming is a hydra flavor... And these kinda suck for starwars...

But come on now... I can get a full starwars cab for one of these...

menace · « **Reply #7 on:** December 16, 2004, 07:41:17 am »

if I lived in europe--1 unit would be $175US to ship

--if this yahoo even sells one he could retire

Lilwolf · « **Reply #8 on:** December 16, 2004, 08:19:47 am »

It might really take a ton of hours per controller. There is a chance he really isn't making much.

The first few takes longer then the others... And if he is using exact parts... It might really take 500+ on parts alone (assuming he has a few parts fab'd)

It doesn't make it worth it though...

Goz · « **Reply #9 on:** December 16, 2004, 09:10:25 am »

I soiled myself when I saw the price tag.

-Goz

SeaMonkey · « **Reply #10 on:** December 16, 2004, 09:21:01 am »

Mother of God!

That thing better be able to PLAY the game for that kind of dough.

A rebuild kit for these is only like $60 or so. I mean, even if he swapped out the pots....he can't be in for more than a buck.

RayB · « **Reply #11 on:** December 16, 2004, 09:28:41 am »

What do you think his rate is? $200 per hour?

DarkKobold · « **Reply #12 on:** December 16, 2004, 09:36:31 am »

This says it all!

RayB · « **Reply #13 on:** December 16, 2004, 09:54:44 am »

The late 90's bubble has burst, but some people haven't realized this yet! (Mostly the sellers)

GGKoul · « **Reply #14 on:** December 16, 2004, 10:54:37 am »

Contact GameCab and see if he is selling his yoke again.

menace · « **Reply #15 on:** December 16, 2004, 11:00:16 am »

LOL (not mine)

MameMaster! · « **Reply #16 on:** December 16, 2004, 12:52:55 pm »

THANKS FOR THE LINK.....now I can't get my wife off my back for the $270. I paid for a USB hacked one!

MameMaster!

PS- Who would possibly pay those prices?

.....

Tiger-Heli · « **Reply #17 on:** December 16, 2004, 01:53:12 pm »

Quote from: mamemaster on December 16, 2004, 12:52:55 pm

THANKS FOR THE LINK.....now I can't get my wife off my back for the $270. I paid for a USB hacked one!

MameMaster!

PS- Who would possibly pay those prices? .....

Yeah, but for $900.00 he might not take 6 months and police action to send it to you! <ducking>

ChadTower · « **Reply #18 on:** December 16, 2004, 02:52:21 pm »

For $900 he could get the pin he wanted, too!

Tiger-Heli · « **Reply #19 on:** December 16, 2004, 03:18:31 pm »

Quote from: ChadTower on December 16, 2004, 02:52:21 pm

For $900 he could get the pin he wanted, too!

Just to clarify, my "he" referred to WestControls, not Mr. ArcadeScum.

I.e. - For $900, Westcontrols may not need six months and police action to ship like Mr. ArcadeScum did.

Not - For $900, Mr. ArcadeScum might have shipped it to you sooner.

But point taken about the pin . . .

MameMaster! · « **Reply #20 on:** December 16, 2004, 05:01:41 pm »

Quote from: Tiger-Heli on December 16, 2004, 03:18:31 pm

Quote from: ChadTower on December 16, 2004, 02:52:21 pm
For $900 he could get the pin he wanted, too!
Just to clarify, my "he" referred to WestControls, not Mr. ArcadeScum.

I.e. - For $900, Westcontrols may not need six months and police action to ship like Mr. ArcadeScum did.

Not - For $900, Mr. ArcadeScum might have shipped it to you sooner.

But point taken about the pin . . .

westcontrols · « **Reply #21 on:** December 17, 2004, 09:45:35 pm »

Reply from West Controls:

These Star Wars Yoke

spidermonkey · « **Reply #22 on:** December 17, 2004, 10:27:54 pm »

Alright, I'm always one for giving 2nd chances so lets see what kind of price they/he comes up with for the repro unit. I hope they use a little lube this time.

paigeoliver · « **Reply #23 on:** December 17, 2004, 10:33:26 pm »

Well, Atari's cost on the ENTIRE PANEL was just $110, and those were not made in house either, they were buying them from elsewhere.

http://www.ionpool.net/arcade/atari_docs/starwarscosts.pdf

Bones · « **Reply #24 on:** December 18, 2004, 06:34:01 am »

Quote from: paigeoliver on December 17, 2004, 10:33:26 pm

Well, Atari's cost on the ENTIRE PANEL was just $110, and those were not made in house either, they were buying them from elsewhere.

http://www.ionpool.net/arcade/atari_docs/starwarscosts.pdf

I have no idea what these things are really worth but yeah-The West Controls version is higher than most would pay. But.....

That .pdf file was from 1983!!! I am reasonably sure pricing has probably changed slightly over the last 21 years and it's not really a fair comparison.

RayB · « **Reply #25 on:** December 18, 2004, 02:30:41 pm »

Atari's costs aren't that relevant since I doubt WestControls buys in the same quantities Atari did in the day. (buying 1000 of a part is SO much cheaper than buying 10).

1UP · « **Reply #26 on:** December 18, 2004, 03:22:00 pm »

I don't want to hear anyone complain about the price of GameCab's yokes ever again.

Kremmit · « **Reply #27 on:** December 19, 2004, 02:56:32 am »

1up-

You'll be offering these with your new cabs, right?

Xiaou2 · « **Reply #28 on:** December 19, 2004, 06:32:17 am »

nah,

1ups yokes will cost 3 times as much and will be made of MDF


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news