Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Coin Door Question  (Read 2621 times)

0 Members and 1 Guest are viewing this topic.

gobuchul74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 47
  • Last login:November 03, 2012, 02:34:06 am
  • I want you to build my arcade controls!
Coin Door Question
« on: December 09, 2004, 11:55:38 pm »
I got an old coin door of the 2 Slot Over/Under variety.  It has a sticker on the coin box stating it was manufactured by Atari, and the coin mechs have a sticker with "Coin Controls, Royton Oldham England".

It looks just like the doors from HAPPS.  Does anyone know if I would be able to use new reject buttons from HAPP?
"We're going to take things away from you on behalf of the common good." - Sen. Hillary Clinton

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Coin Door Question
« Reply #1 on: December 10, 2004, 12:29:29 am »
Looks doesn't mean is.

You have a Coin Controls door assembly. It is built to metric standards and the Happ stuff is NOT interchangeable.

Stingray

  • Official Slacker - I promise to try a lot less
  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10463
  • Last login:April 08, 2021, 03:43:54 pm
Re: Coin Door Question
« Reply #2 on: December 10, 2004, 09:34:10 am »
A picture would be worth a thousand words.

-S
Stingray you magnificent bastard!
This place is dead lately.  Stingray scare everyone off?

Chris

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4574
  • Last login:September 21, 2019, 04:59:49 pm
    • Chris's MAME Cabinet
Re: Coin Door Question
« Reply #3 on: December 10, 2004, 11:22:20 am »
Happ has Coin Controls parts at http://www.happcontrols.com/cc/42315700.htm.

--Chris
--Chris
DOSCab/WinCab Jukebox: http://www.dwjukebox.com

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Coin Door Question
« Reply #4 on: December 10, 2004, 11:43:09 am »
Happ sells some original Coin Controls parts, but the selection is limited to remaining new old stock parts. Coin Controls was bought out a couple of years ago by Money Controls who promptly discontinued the amusement and coin handling product line in order to concentrate on dollar bill acceptors and casino needs.

Chris

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4574
  • Last login:September 21, 2019, 04:59:49 pm
    • Chris's MAME Cabinet
Re: Coin Door Question
« Reply #5 on: December 10, 2004, 11:53:04 am »
Bob Roberts will occasionally have Coin Controls parts as well.

As noted, though, the best thing is to post a picture.
--Chris
DOSCab/WinCab Jukebox: http://www.dwjukebox.com

gobuchul74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 47
  • Last login:November 03, 2012, 02:34:06 am
  • I want you to build my arcade controls!
Re: Coin Door Question
« Reply #6 on: December 10, 2004, 07:33:53 pm »
Okay, here's a couple shots of the reject button, hopefully they're not too big.
"We're going to take things away from you on behalf of the common good." - Sen. Hillary Clinton

Extreme8

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 182
  • Last login:August 24, 2008, 03:46:24 pm
Re: Coin Door Question
« Reply #7 on: December 10, 2004, 08:03:48 pm »
I'm in exactly the same situation, looking for a reject button for a coinco door.
I ordered some parts from Bob Roberts today and asked if he had any on hand.
He informed me that they are no longer being produced and he sold out of his used inventory some time ago.
He did however provide me with this link:

http://www.dameon.net/BBBB/kk.html

It's the entire trim kit for the coinco. It's $20, but it'll fix up that old door.

Will

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 281
  • Last login:April 08, 2012, 03:32:27 am
  • Finished Lurking.....
Re: Coin Door Question
« Reply #8 on: December 10, 2004, 09:04:51 pm »
This thread helps me out I have two coin controls and have been looking for new coin rejects for some time.I found an old manual inside my cab that a part list for coin controls.Tried calling and said that # is no longer in service.I thought that there were the same as happ and was thinking of ordering a pair of the blue coin rejects and replace mine,guess my plans have changed.
« Last Edit: December 10, 2004, 09:07:03 pm by Will »

clanggedin

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1071
  • Last login:July 02, 2012, 11:08:55 pm
  • O'DOYLE RULES!!!
Re: Coin Door Question
« Reply #9 on: December 10, 2004, 09:59:45 pm »
I posted a similar question to this a few weeks back. Happs does sell Coin Controls reject buttons in Red ONLY. I wanted different colored buttons, but they are only made in red. Some people out there have Yellow buttons, but unfortunately I can't get 4 of them for my door.

Here is a link to a site selling reject buttons for Coin Control machines

http://www.centsibleamusements.com/browseproducts/Coin-Reject-Button-(Coin-Controls).html


gobuchul74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 47
  • Last login:November 03, 2012, 02:34:06 am
  • I want you to build my arcade controls!
Re: Coin Door Question
« Reply #10 on: December 10, 2004, 11:58:10 pm »
Fantastic, thanks for the help! A bit of paint, some new buttons, and she'll look like new.
"We're going to take things away from you on behalf of the common good." - Sen. Hillary Clinton

Shape D.

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1602
  • Last login:July 05, 2012, 06:17:57 pm
  • >Look at me, I'm a Newbie<
Re: Coin Door Question
« Reply #11 on: December 13, 2004, 07:30:55 pm »
I posted a similar question to this a few weeks back. Happs does sell Coin Controls reject buttons in Red ONLY. I wanted different colored buttons, but they are only made in red. Some people out there have Yellow buttons, but unfortunately I can't get 4 of them for my door.

Here is a link to a site selling reject buttons for Coin Control machines

http://www.centsibleamusements.com/browseproducts/Coin-Reject-Button-(Coin-Controls).html


Liar

http://www.happcontrols.com/cc/420517xx.htm

 ;D
Hey Baby, Have you ever met a Newbie with 38 pages of previous posts before? Do you Want to?

spiffyshoes

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 620
  • Last login:September 20, 2015, 01:24:46 pm
Re: Coin Door Question
« Reply #12 on: December 13, 2004, 08:09:17 pm »

gobuchul74

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 47
  • Last login:November 03, 2012, 02:34:06 am
  • I want you to build my arcade controls!
Re: Coin Door Question
« Reply #13 on: December 13, 2004, 10:52:25 pm »
No, that link worked when it was first posted, and oddly enough I went to Happs site to try and get a new link and the address bar still lists that address.

Just do a search on Happs site for "coin controls" and its the first result on the search list.
"We're going to take things away from you on behalf of the common good." - Sen. Hillary Clinton