Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: 6 button setup question  (Read 1124 times)

0 Members and 1 Guest are viewing this topic.

gique

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 25, 2018, 10:07:51 pm
  • I <3 my egret
6 button setup question
« on: December 08, 2004, 05:11:17 am »
what is needed to get a 6 button setup working on a cab using a J-pac?

thanks!
Logged

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
Re: 6 button setup question
« Reply #1 on: December 08, 2004, 05:21:33 am »
The Jpac, the buttons, a jamma harness, and some extra wires for buttons 4-6, since those buttons are not on the jamma harness.
Logged
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

gique

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 25, 2018, 10:07:51 pm
  • I <3 my egret
Re: 6 button setup question
« Reply #2 on: December 08, 2004, 06:08:13 pm »
any idea where these extra wires go?
Logged

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
Re: 6 button setup question
« Reply #3 on: December 09, 2004, 03:36:36 am »
Do you actually HAVE your JPAC yet?

If not, wait until you get it, it is labeled.
Logged
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

gique

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:April 25, 2018, 10:07:51 pm
  • I <3 my egret
Re: 6 button setup question
« Reply #4 on: December 09, 2004, 01:57:29 pm »
yes, I do have my Jpac

- I was wondering where the button wiring went on the jamma connector.
Logged

disaac

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19
  • Last login:October 15, 2009, 05:16:29 pm
  • I want to build my own arcade controls!
Re: 6 button setup question
« Reply #5 on: December 09, 2004, 02:21:39 pm »
Since I am a 2 day old 1st Jamma cab owner, please take my guess with a grain of salt.

From what I have been reading, the buttons 1-4 should be already wired up to the Jamma Harness.  This funcitonality will be carried through the JPAC to the PS2/USB already.

Since the Jamma harness can only supports the 4 buttons, the extra 2 buttons have to be wired directly to the JPAC to be sent to the PC.

I think this post was more for my knowledge than anybody elses :D.  Can someone confirm this for Gique and I?
Logged
Pages: [1]
  
Go Up
« previous next »