Author Topic: Need advice on panel depth (Read 761 times)

vader · « **on:** December 06, 2004, 09:30:28 pm »

Designing a new panel that will go onto the upright and need to know the recommended depth I should use since I am now playing Golden Tee and I know for sure I would whack the screen, From the bottom of the TB to the top of my current panel is 12" right now and I know I definitely go farther than that, total depth of my panel is 18"....I was thinking about 24" but might be a tad large

Tim

Edit : Actually from the angle I was standing at, didn't seem like enough room, but 18" should be just about right...will just minimize the overhand a litte bith

Hiub1 · « **Reply #1 on:** December 06, 2004, 10:26:57 pm »

Mine is 22'' and the room is plentiful. I would think with 18'' you should have no problems. I am in the midst of making a new CP, so I will try out the 18'' and see how it feels.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Need advice on panel depth (Read 761 times)

vader

Need advice on panel depth

Hiub1

Re: Need advice on panel depth