fixing lexan to cp - additional fasteners?

[ras2a]

I'm sure this has been covered but I can't find it using various phrases (attach/fix lexan/plexi to control panel/cp etc).  So, besides your buttons etc holding your lexan/plexi to your control panel, is it wise to use additional methods to 'fix' it in place, e.g. carriage bolts or similar? I have quite big areas of 'space' around the edges of my cp and was just wondering whether the lexan may 'lift' if I didn't use something to fasten it down with?

cheers folks

[Hiub1]

What I see done at arcades is just drilling holes on the plexi and screwing it down to the cp. Someone else might have a better suggestion though.

[ras2a]

What I see done at arcades is just drilling holes on the plexi and screwing it down to the cp. Someone else might have a better suggestion though.

Cool.  Was looking for a more 'invisible' solution...but I reckon that's prolly the best thing to do unless anyone else uses other methods?

[Shape D.]

if your control panel + plexi is 13/16"  you could use someting like this.
http://www.tmoulding.com/cart/customer/product.php?productid=10&cat=4&page=1

I'm not shur how well this goes around corners though.

[ras2a]

if your control panel + plexi is 13/16"  you could use someting like this.
http://www.tmoulding.com/cart/customer/product.php?productid=10&cat=4&page=1

I'm not shur how well this goes around corners though.

My CP and lexan will be 20mm alltogether.  Not sure what 13/16" is in mm....sorry us brits eh

[Shape D.]

about 10/16"

[whammoed]

ummmm... 20 mm is closer to 13/16

13/16" = 20.6375 mm

[whammoed]

also tmoulding.com sends free samples so you can try before you buy.

[ras2a]

ummmm... 20 mm is closer to 13/16

13/16" = 20.6375 mm

Wow superb...that sould be just the job as my CP art is pretty thick (gloss laminated paper 220gsm).  I may order some of this if my regular 20mm T-Moulding doesn't do the trick.  

cheers guys