Author Topic: Any interest in "EXACT" Pacman Cabinet Plans? (Read 10085 times)

usedelectronics · « **on:** November 14, 2004, 05:47:06 am »

I spent a bit of time generating a "Exact" 3d model and plans of a pacman cabinet. Plans include all the wooden parts, with associated router cuts, drill holes, and basic dimensions.
Taken from a painfully converted and now deceased pac cabinet.

LordDamo · « **Reply #1 on:** November 14, 2004, 06:12:55 am »

Quote from: usedelectronics on November 14, 2004, 05:47:06 am

I spent a bit of time generating a "Exact" 3d model and plans of a pacman cabinet. Plans include all the wooden parts, with associated router cuts, drill holes, and basic dimensions.
Taken from a painfully converted and now deceased pac cabinet.

Im always on the look out for cab dimentions. Gives me ideas with my building. The more exact the dimentions, the better. So, count 1 for someone taking interest . . .

subzero23 · « **Reply #2 on:** November 14, 2004, 06:18:04 am »

Since you put all the work into it please send them to me, I'll make use of them someday just not right now lol but it'd definately be nice to have them on file.

SirPeale · « **Reply #3 on:** November 14, 2004, 07:50:13 am »

I'd take them, looking to build. Also make sure Jakobud gets them too!

Jabba · « **Reply #4 on:** November 14, 2004, 08:44:47 am »

Thanks for the contribution.
I'd be interested in a copy of them as well...
Must..build..new..cab

Thanks!

Grauwulf · « **Reply #5 on:** November 14, 2004, 09:48:14 am »

I'd definatly be interested in plans as well. I will eventually be building a Pac cabinet as well.

sac01 · « **Reply #6 on:** November 14, 2004, 11:48:29 am »

Same here, would save me alot of work.

sac

dirt · « **Reply #7 on:** November 14, 2004, 11:48:31 am »

add me to the list as a pac cab is next on my list of things i want to build.

dirt

missioncontrol · « **Reply #8 on:** November 14, 2004, 12:04:43 pm »

add me to the list....I'm very interested....planning them to be one of my future projects

SirPeale · « **Reply #9 on:** November 14, 2004, 12:54:30 pm »

If you need a place to post them, I can host them.

shafor · « **Reply #10 on:** November 14, 2004, 02:21:46 pm »

me too! Please add me to the list

kcorcoran · « **Reply #11 on:** November 14, 2004, 03:40:17 pm »

me 3!

feel free to shoot them over.

what 3 program did you use? i'm using some older software called truespace3d. eventually i'll open up this maya demo and get my hands dirty.

http://www.keithcorcoran.com/arcade/box.jpg

http://www.keithcorcoran.com/arcade/mame02.jpg

here's 2 i did.. actually working on a mini pac now so your model/plans would help.

i'll take it in dxf or obj without textures if you have it.

Crazy Cooter · « **Reply #12 on:** November 14, 2004, 10:32:13 pm »

Me 26. Or whatever number we're on.

Daniel270 · « **Reply #13 on:** November 15, 2004, 12:07:47 am »

I'd love a set too....

usedelectronics · « **Reply #14 on:** November 15, 2004, 02:47:36 am »

I generated the 3d models (and assemblies) in solid edge.
I will create flat 2d dimensioned files for the individual parts, and post them later this week.

LordDamo · « **Reply #15 on:** November 19, 2004, 03:54:20 pm »

any word on those plans yet?

Crazy Cooter · « **Reply #16 on:** November 19, 2004, 05:23:01 pm »

Heheh, yeah, two whole sentences of words. Right above yours.

LordDamo · « **Reply #17 on:** November 28, 2004, 03:20:51 am »

Quote from: Crazy Cooter on November 19, 2004, 05:23:01 pm

Heheh, yeah, two whole sentences of words. Right above yours.

Heh heh, check the dates. I posted FIVE days later. And there still not posted. Heh, Heh . .

DrewKaree · « **Reply #18 on:** November 28, 2004, 03:26:04 am »

usedelectronics · « **Reply #19 on:** November 28, 2004, 03:33:51 am »

Hehe... As usual, running "slightly" behind schedule.
I will try to finish the conversion tonight...
Just got back from the wife's 10 year reunion...

LordDamo · « **Reply #20 on:** November 28, 2004, 03:50:58 am »

No worrys - I was just checking back on this, many thanks.

Now where did I put that tee pee for DrewKaree's bung hole

BOING heh heh . . .

LsLSpamMatt · « **Reply #21 on:** December 03, 2004, 11:09:49 pm »

I hope I'm doing this correctly.
I'm interested in these plans, as the GF, or my Mom woudl love a pac cabinet.

*BUMP*

Matt

LordDamo · « **Reply #22 on:** December 05, 2004, 01:01:56 am »

Hmmmmmm . . .

*bump*

usedelectronics · « **Reply #23 on:** December 05, 2004, 06:02:03 am »

I've discovered something strange..
Does anyone else have a pac upright they can grab 2 measurements from?

I took basic measurements of the cabinet before knocking it apart to get all the fine details, but now it seems as though the cabinet gets skinnier (left to right) as it goes up.

LordDamo · « **Reply #24 on:** December 05, 2004, 06:53:50 am »

Try PM'ing Paige. He seems to be a guy with a lot of cabs, lucky bloke.

Hope this helps

saint · « **Reply #25 on:** December 05, 2004, 11:35:28 am »

I have one. What measurements do you need?

--- saint

Quote from: usedelectronics on December 05, 2004, 06:02:03 am

I've discovered something strange..
Does anyone else have a pac upright they can grab 2 measurements from?

I took basic measurements of the cabinet before knocking it apart to get all the fine details, but now it seems as though the cabinet gets skinnier (left to right) as it goes up.

usedelectronics · « **Reply #26 on:** December 05, 2004, 05:04:15 pm »

Let's see if I can describe it...

I need 2 measurements. The firs one is the distance between the side panels from left to right at the bottom of the coin door panel,
and the distance between the side panels at the marquee.

Thanks saint!

spocktwin · « **Reply #27 on:** December 05, 2004, 05:15:27 pm »

If you are interested in two measurements I have one also

LsLSpamMatt · « **Reply #28 on:** December 10, 2004, 04:52:51 pm »

5 Day *BUMP*

HEI!

LsLSpamMatt · « **Reply #29 on:** December 14, 2004, 12:45:15 pm »

Where, oh where have you gone Used Electronics?
I must build pac-man

missioncontrol · « **Reply #30 on:** December 14, 2004, 12:54:07 pm »

Quote from: LsLSpamMatt on December 14, 2004, 12:45:15 pm

Where, oh where have you gone Used Electronics?

LsLSpamMatt · « **Reply #31 on:** December 14, 2004, 04:36:43 pm »

Mission,

I know man, not trying to sound impatient or anything.
It's just my friendly way of keeping this topic right at the top.

Matt

usedelectronics · « **Reply #32 on:** December 15, 2004, 12:23:00 am »

I still need those 2 measurements to finish up the plans.

Width of cabinet at the bottom, and width at the top.I have a strange suspicion it tapers slightly, but I am not 100%.

LordDamo · « **Reply #33 on:** December 15, 2004, 08:09:14 am »

Have you contacted Saint (da man) or spocktwin as yet? They have both offered to obtain the two measurements for you as they have the cabinet in question.

Hope this helps.

saint · « **Reply #34 on:** December 15, 2004, 11:00:53 am »

Sorry, I lost track of this thread until now. I'll measure when I get home this evening

--- saint

TheRCGuy · « **Reply #35 on:** December 15, 2004, 11:32:14 am »

Please add me to the list also. I would enjoy this!

elpresidente · « **Reply #36 on:** December 15, 2004, 12:14:44 pm »

As well as me. TIA

GGKoul · « **Reply #37 on:** December 15, 2004, 12:58:07 pm »

Why not...

usedelectronics · « **Reply #38 on:** December 15, 2004, 02:21:19 pm »

As soon as those measurements come through, they should be available shortly thereafter.

SirPeale · « **Reply #39 on:** December 15, 2004, 02:50:50 pm »

I was going to suprise you with measurements from my cab, but I'll be damned if I can find even ONE of my five tape measures.

I know where one is, for sure: my wife's car. She's @ work.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news