4 way tip.

[paigeoliver]

If you have a Happ super and a Ms. Pac-Man reunion stick you can just swap the handles to either get a shorty balltop 8-way or a true 4-way with a long bat top.

I just tried it, it works fine. I might swap out my Wico for one of these just to match my other 2 sticks.

[paigeoliver]

Edit. It only works one way, You can make the bat top 4-way, but you can't make the ball top 8-way, it doesn't work no matter how you swap parts around.

[subzero23]

What is the maximum thickness you can install a Ms. Pac-Man reunion joystick?

I was thinking about routing to 1/8" (or thicker if possible) + the 1/8" plexiglass = 1/4"

[paigeoliver]

Maximum thickness is METAL. And you won't want to use plexi with one of these either. The shaft is incredibly super short.

[subzero23]

What thickness metal then?

[spiffyshoes]

If you were using the longer handle from the Super would you be able to bottom mount the PacMan stick?

[paigeoliver]

If you use a super handle you can mount it normally in a wood panel. A Reunion stick is essentially a true 4-way super with a different handle. That is why you can swap the handle.

[quarterback]

If you have a Happ super and a Ms. Pac-Man reunion stick you can just swap the handles to either get a shorty balltop 8-way or a true 4-way with a long bat top.

I just tried it, it works fine. I might swap out my Wico for one of these just to match my other 2 sticks.

Does this last sentence mean that I could use a Wico leaf balltop in place of the short Ms. Pac reunion stick (to get a more reasonable height through a wood cp)?

[paigeoliver]

No, Wico handles don't fit happ bases, the shaft is the wrong diameter.