Author Topic: Attaching the IPAC to CP. (Read 1790 times)

John IV [MameUI64] · « **on:** September 18, 2002, 05:03:37 pm »

How have folks attached the IPAC to your CP? I didnt' see mentioned on the site what size screws you can use. I've heard some using that glue gum stuff too, etc. Metal washers or standoffs of some kind recommended? Thanks -

SirPoonga · « **Reply #1 on:** September 18, 2002, 05:33:33 pm »

I used nylon spacers formt he local hardware store.

Here's a pic (copy and paste link if it doesn;t show up)
http://free.hostdepartment.com/SirPoonga/images/ipacmount.jpg


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Attaching the IPAC to CP. (Read 1790 times)

John IV [MameUI64]

Attaching the IPAC to CP.

SirPoonga

Re:Attaching the IPAC to CP.