Author Topic: Optipac USB cable question (wrong cable?) (Read 760 times)

TOK · « **on:** November 01, 2004, 05:54:19 pm »

Ordered an Optipac and trackball a few weeks ago, but I've been real busy and hadn't looked at the stuff. I just started making my new panel for the trackball, and when I looked at the Optipac and USB cable that was supplied with it, I'm thinking I might have recieved the wrong cable.

The Optipac has 2 serial ports on it, the left is marked USB. My issue with the cable that I was given is that its USB on one end and PS/2 on the other. This should be serial to USB, right?

I'm thinking the cable I got was the USB to PS/2 for the Ipac.

Anyone have one that could let me know, or am I missing something very obvious?

AndyWarne · « **Reply #1 on:** November 01, 2004, 05:58:53 pm »

I think you need to drop me an email about this: andy@ultimarc.com.

TOK · « **Reply #2 on:** November 01, 2004, 06:06:48 pm »

Done. Thanks for the fast reply Andy!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Optipac USB cable question (wrong cable?) (Read 760 times)

TOK

Optipac USB cable question (wrong cable?)

AndyWarne

Re:Optipac USB cable question (wrong cable?)

TOK

Re:Optipac USB cable question (wrong cable?)