Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Stainless steel CP  (Read 1102 times)

0 Members and 1 Guest are viewing this topic.

daeven

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 196
  • Last login:July 15, 2022, 12:17:33 pm
  • Llama this!
Stainless steel CP
« on: October 16, 2004, 05:13:55 pm »
I've got access to a CNC water jet cutting tool (plus a brake press for bending metal).  Anyways, I made an Autocad drawing and cut my panel out of stainless steel.  My plan is to cover it with the Happ black vinyl, but it looks kind of cool in stainless.

There were some errors in the cutting - does anyone know how to tell the CNC machine to cut the button and screw holes from the inside of the lines?  Because of the errors, this one is definately getting covered, but maybe I'll do another one and do a comparison.
« Last Edit: October 16, 2004, 05:14:57 pm by daeven »
Logged

AmericanDemon

  • The Reason the short bus was invented... 100% Slacker Guaranteed, 4:20 yet?
  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1357
  • Last login:September 22, 2019, 11:08:03 pm
  • Still an AmericanDemon
Re:Stainless steel CP
« Reply #1 on: October 16, 2004, 06:23:47 pm »
It varies between softwares.  My recommendations is to reduce the size of the hole so that it matches your need.
Logged

Pieman2004

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 113
  • Last login:July 15, 2009, 11:29:57 pm
Re:Stainless steel CP
« Reply #2 on: October 16, 2004, 06:29:02 pm »
I also cut mine out with a automated plasma cutter. I imagine it's about the same. I just made the holes smaller than they need to be, because where the holes start is the same place they finish and it makes a notch there. If you end up needing bigger holes you can just drill em out.
Logged
Pages: [1]
  
Go Up
« previous next »