Soul Edge button problem.

[BLACK KNIGHT]

I have a Tekken 2 arcade machine and I recently bought a Soul Edge board off of ebay.  They both have a System 11 board so it's suppose to be a perfect swap.  However there is 1 button a kick button that doesn't work on Soul Edge.  I made sure to plug the kick harness into the Soul Edge PCB.  I plugged Tekken 2 back in and all the buttons work fine.  Could the kick harness for the Soul Edge PCB be wired differently?  I thought it was standard like the JAMMA harness.

[purplec]

i currently have this problem im starting to think its different kick harnesses required any chance you could confirm

[DJ Infinity]

Hmmm,
Having a Tekken Tag & a Soul Calibur on the way this should be interesting. Anyway try this I noticed this on my Soul CAlibur II & Tekken IV setup the buttons are NOT identical. They could be other places on the kick harness. If you can try different pins and see what you get.

[paigeoliver]

Check the pinouts, I seem to recall Soul Edge was funky about the 4th button and I remember doing some trace cutting and soldering action on mine to make it work the same as the rest of my boards.