Author Topic: PCBs, Marquee, CP, and coin door (Read 795 times)

Squirrley · « **on:** September 06, 2004, 11:21:52 am »

I have the PCBs, marquee, and controll panel from World Series the season. Control panel will have 2 baseball flippers and stat key board but will need 5 buttons. PCB is working great. Was in my cab when I bought it. The marquee is in good condition, just needs cleaned up a bit.

I also have the PCBs from Big Event Golf. I have not had a chance to test it.

I have a coin door with 2 Coin Mechs and a counter. Counter reads 07642.

I am looking to trade for an I-Pac, J-Pac, OptiPac, ArcadeVGA or make an offer on something that you want. I can get pics of anything if wanted.

Hoagie_one · « **Reply #1 on:** September 07, 2004, 11:45:58 am »

is it an over under coin door?

Squirrley · « **Reply #2 on:** September 07, 2004, 01:40:18 pm »

Here are some pics of the Coin Door. I needs cleaned up a bit and maybe a new paint job on the front because the paint has been worn off in a few places.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: PCBs, Marquee, CP, and coin door (Read 795 times)

Squirrley

PCBs, Marquee, CP, and coin door

Hoagie_one

Re:PCBs, Marquee, CP, and coin door

Squirrley

Re:PCBs, Marquee, CP, and coin door