Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: what two wires do i jump to kick start an atx Mobo?  (Read 903 times)

0 Members and 1 Guest are viewing this topic.

Hoagie_one

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3062
  • Last login:September 04, 2020, 12:36:28 pm
  • Um....whats a cabinet
what two wires do i jump to kick start an atx Mobo?
« on: September 01, 2004, 09:13:40 pm »
Just wondering before i get too far into this project
Logged

Goz

  • KOTA
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3421
  • Last login:June 25, 2024, 10:06:41 pm
Re:what two wires do i jump to kick start an atx Mobo?
« Reply #1 on: September 01, 2004, 09:21:52 pm »
Virtually all modern ATX mobo's are labled with PWR SW. You cross the two pins on the mobo or the two wires coming from those two pins.

Logged

mattv

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 192
  • Last login:June 10, 2022, 06:33:25 am
Re:what two wires do i jump to kick start an atx Mobo?
« Reply #2 on: September 01, 2004, 09:33:13 pm »
Pin 14 and any ground wire

Or to put it in movie language, the green wire and the black wire
Logged

Hoagie_one

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3062
  • Last login:September 04, 2020, 12:36:28 pm
  • Um....whats a cabinet
Re:what two wires do i jump to kick start an atx Mobo?
« Reply #3 on: September 01, 2004, 09:56:31 pm »
thx guys
Logged

mvaughn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 37
  • Last login:December 05, 2007, 11:25:55 pm
  • I'm a llama!
    • NukeSilo.com
Re:what two wires do i jump to kick start an atx Mobo?
« Reply #4 on: September 02, 2004, 12:01:22 am »
Rather than tapping into the power supply connector, you should look up the documentation on the motherboard and find the pin header that the normal power switch connects to.

This would be cleaner in my opinion.

Cheers
Logged
Pages: [1]
  
Go Up
« previous next »