Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: CPO  (Read 1164 times)

0 Members and 1 Guest are viewing this topic.

Trimoor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 596
  • Last login:November 18, 2006, 09:01:46 pm
  • I like shooting out of helicopters.
    • Trimoor
CPO
« on: August 18, 2004, 05:18:58 pm »
I took the top layer off my control panel, and this is what I found.

Now what do I do?
I would like to make my own custom control set, but there are so many holes in the metal.

Should I try to fill in the holes?
Should I have someone make a new one from scratch?
Should I ignore the holes, and just cover it with plex?

This is the cab i'm refering to:
http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=23330;start=msg190208#msg190208

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:July 10, 2025, 01:33:58 am
  • There's my post
    • RayB.com
Re:CPO
« Reply #1 on: August 18, 2004, 05:39:14 pm »
Aw man that's too bad. I like Assault!
;-)
NO MORE!!

Trimoor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 596
  • Last login:November 18, 2006, 09:01:46 pm
  • I like shooting out of helicopters.
    • Trimoor
Re:CPO
« Reply #2 on: August 18, 2004, 06:00:49 pm »

NoOne=NBA=

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2718
  • Last login:July 23, 2011, 08:59:16 am
  • Just Say No To Taito! -Nichibutsu
Re:CPO
« Reply #3 on: August 18, 2004, 07:02:40 pm »
What controls are you wanting to put in it?

Trimoor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 596
  • Last login:November 18, 2006, 09:01:46 pm
  • I like shooting out of helicopters.
    • Trimoor
Re:CPO
« Reply #4 on: August 18, 2004, 07:46:23 pm »
most likely a trackball, spinner, joysticks, and buttons.
I might omit some if there isn't room.

I just read oscar's CP restoration guide, and it looks promising, but could I drill new holes through the fiberglass and metal?
I'd have to get a welder too...

What should I do with the assault overlay?
Is it pretty much useless?