Author Topic: Thickness for a Plexi / Acrylic CP (Read 1015 times)

Goz · « **on:** August 10, 2004, 12:20:41 pm »

Anyone have an idea of how thick a control panel made out of Plexi or Acrylic would need to be in order to stand up to normal use? I was considering having made a CP out of a dark tint Plexi / Acrylic to sit on top of the wood CP box.

-Goz

Sylentwulf · « **Reply #1 on:** August 10, 2004, 12:36:51 pm »

I would guess the same as wood, 3/4"
You could probly do 1/2" and it wouldn't break, but it would bend/bow an awful lot.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Thickness for a Plexi / Acrylic CP (Read 1015 times)

Goz

Thickness for a Plexi / Acrylic CP

Sylentwulf

Re:Thickness for a Plexi / Acrylic CP