Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: what wood should i use  (Read 2018 times)

0 Members and 1 Guest are viewing this topic.

nullb0y

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1307
  • Last login:November 17, 2024, 04:06:05 pm
  • Slow In Fast Out
    • WAT Racing
what wood should i use
« on: August 22, 2002, 12:31:58 pm »
im making a lap controll pannel and i need to know what a sturdy but light kind of lumber i should use i want to add black spraypaint and clear over coatto finish it any sugestions?
Slow In Fast Out

SNAAAKE

  • -Banned-
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3147
  • Last login:July 21, 2004, 03:44:18 am
  • Banned for abusive postings.
Re:what wood should i use
« Reply #1 on: August 22, 2002, 12:42:13 pm »
pine brotheaa

its very light..

neuromancer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 446
  • Last login:May 10, 2006, 04:26:57 pm
  • Can I Play?
Re:what wood should i use
« Reply #2 on: August 22, 2002, 01:07:37 pm »
Depends how big you make it. If it's small, you can probably use 1/4" masonite for the top, and maybe 1x6 ripped down to 4" for the sides. If it's big, then 3/8 in ply would work if it was braced well, 1/2 otherwise.

Mine uses 1/8 inch paneling for the bottom.

Bob

CD_Vision

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 93
  • Last login:January 23, 2010, 10:01:56 am
  • Link sez it all
    • CD_Vision's Arcade Controls
Re:what wood should i use
« Reply #3 on: August 23, 2002, 02:39:11 pm »
Lots of people (including me) like to use Medium Density Fiberboard for smaller projects. I use 3/4" or 5/8". Be sure to use a primer when you paint it or it will soak right into the stuff.