Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wood rot on Pac Man cocktail  (Read 2192 times)

0 Members and 1 Guest are viewing this topic.

Trenchbroom

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 276
  • Last login:November 21, 2020, 09:25:43 pm
  • Wampus? Get over here!
Wood rot on Pac Man cocktail
« on: July 28, 2004, 09:27:17 pm »
I recently purchased a partially-MAMEd Pacman cocktail from a friend of mine.  I'm ordering new control panels and a bezel shortly.  While looking over the base of the machine to see if it had leg levelers I came across the following wood damage on both the front corners (see below).  I'm no woodworker so I'm not sure if I should be concerned that it's wood rot or a structural concern.

How would you fix it?  Putty/filler and paint?  Is it a structural concern?  Doesn't seem to be very deep.  As always, thanks for the help.
« Last Edit: July 28, 2004, 09:30:39 pm by Trenchbroom »

Trenchbroom

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 276
  • Last login:November 21, 2020, 09:25:43 pm
  • Wampus? Get over here!
Re:Wood rot on Pac Man cocktail
« Reply #1 on: July 28, 2004, 09:28:06 pm »
Another photo:


Trenchbroom

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 276
  • Last login:November 21, 2020, 09:25:43 pm
  • Wampus? Get over here!
Re:Wood rot on Pac Man cocktail
« Reply #2 on: July 28, 2004, 09:29:27 pm »
Overall though, it's in pretty good shape.  You should have seen it:  top of an abandoned stack of cocktails in the back of a musty warehouse with pigeon crap all over it.  It really shined up pretty well:


paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
Re:Wood rot on Pac Man cocktail
« Reply #3 on: July 28, 2004, 09:56:43 pm »
I wouldn't worry about it. That part looks like part of a separate little base at the bottom. I could go in the other room and flip mine over and look, but I have paint stripper on my clothes and don't want to get it on the cocktail.
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

Trenchbroom

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 276
  • Last login:November 21, 2020, 09:25:43 pm
  • Wampus? Get over here!
Re:Wood rot on Pac Man cocktail
« Reply #4 on: July 29, 2004, 11:52:08 pm »
Thanks Paigeoliver!  I'll just fill it and paint it then without worry.

SirPoonga

  • Puck'em Up
  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 8188
  • Last login:July 20, 2025, 03:37:24 pm
  • The Bears Still Suck!
Re:Wood rot on Pac Man cocktail
« Reply #5 on: July 30, 2004, 12:13:59 am »
It looks like it's beat up, not rot.  See the dent in the coner of the min part.  I bet someone hit a door edge or truck bed or something.

not a big deal.  Wood putty, sand, paint.  That should fix it up.

Kremmit

  • - AHOTW -
  • Wiki Contributor
  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3165
  • Last login:June 17, 2025, 04:07:55 pm
  • Who the heck is that?
Re:Wood rot on Pac Man cocktail
« Reply #6 on: July 30, 2004, 02:36:57 am »
Overall though, it's in pretty good shape.  You should have seen it:  top of an abandoned stack of cocktails in the back of a musty warehouse with pigeon crap all over it.  It really shined up pretty well:

Where is there a musty warehouse with a stack of abandoned coctails?

Probably 900 miles from me :'(

rchadd

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1830
  • Last login:June 10, 2013, 06:14:06 am
  • Made in Cornwall
Re:Wood rot on Pac Man cocktail
« Reply #7 on: July 30, 2004, 05:55:51 am »
Quote from: Kremmit link=board=1;threadid=22489;start=0#msg183201

[b
Where[/b] is there a musty warehouse with a stack of abandoned coctails?

Quote

any warehouses like that in the UK?

fredster

  • Grand Prophet of Arcadeology
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2267
  • Last login:February 16, 2019, 04:28:53 pm
  • It's all good!
Re:Wood rot on Pac Man cocktail
« Reply #8 on: July 30, 2004, 09:21:34 am »
You can also go to lowes or home depot and get a laminate sheet to iron over the top of it.  

But Just filling it and painting it is okay.  It's lible to chip if it's too deep.
Most of those cocktails are like that.

Didn't anybody take shop in school?  
King of the Flying Monkeys from the Dark Side