Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: 1/8th slot cutter?  (Read 1074 times)

0 Members and 1 Guest are viewing this topic.

krion

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • Last login:January 13, 2021, 01:18:20 pm
  • I'm a llama!
1/8th slot cutter?
« on: July 24, 2004, 07:16:26 pm »
This is the smallest they have in my area w/o special ordering it.  I've checked everywhere hehehe.  Is this too big for 3/4" t-molding?


TalkingOctopus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1722
  • Last login:July 20, 2025, 03:56:38 am
  • @!#?@!
    • My Arcade
Re:1/8th slot cutter?
« Reply #1 on: July 24, 2004, 07:18:25 pm »
yes.  You will have to use hot glue or something to hold the t molding in place.

MiKman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 360
  • Last login:March 25, 2018, 12:28:45 pm
  • Blah
Re:1/8th slot cutter?
« Reply #2 on: July 24, 2004, 07:26:58 pm »
Yes 1/8 is too big. Check saw, blade sharpening type shops.  I couldn't find one at all the regular places (hardware stores, tool warehouses, etc).  It is after all a fairly specialty type of a bit.  And the sharpening shop I went to had them and several other strange type blades and bits for routers...

reebboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 81
  • Last login:December 12, 2005, 01:34:53 am
  • Now its time for some serious insanity!!!
Re:1/8th slot cutter?
« Reply #3 on: July 25, 2004, 12:42:11 am »
Check this place out.  They have 1/16" 3 wing slot cutters with the arbor for only $16.00 and there appears to be no shipping if your in the US.  

http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html  :)
Dude!!! Where's my game.....