Author Topic: Will this work with the J-pac? (Read 775 times)

CthulhuLuke · « **on:** July 19, 2004, 08:06:37 pm »

I have a bad feeling the versus cabinet harness won't work with the j-pac.

any suggestions on how I could hook this thing up to a jamma harness, because I can think of a few alternatives to the j-pac but so far the cheapest method would be using it.

SirPeale · « **Reply #1 on:** July 19, 2004, 08:58:53 pm »

You'll have to completely rewire the cabinet to the JAMMA standard.

mattv · « **Reply #2 on:** July 19, 2004, 10:24:52 pm »

Urk; what a mess.

You would be better off to abandon all of that wiring and start again with a proper JAMMA harness

CthulhuLuke · « **Reply #3 on:** July 20, 2004, 12:30:55 am »

Looks like this bad boy's gonna have to be completely re-wired! oh well, I have a whole box of wire crimps for my car stereos, I'll try to not mutilate the wires too bad but I'm pretty sure this cabinet will now officially become a standard Jamma cabinet thanks to my old simpsons jamma connector. Thanks for the advice, this thing should be flippin awesome when its done.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Will this work with the J-pac? (Read 775 times)

CthulhuLuke

Will this work with the J-pac?

SirPeale

Re:Will this work with the J-pac?

mattv

Re:Will this work with the J-pac?

CthulhuLuke

Re:Will this work with the J-pac?