Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: how to wire this panel with AKI?  (Read 1145 times)

0 Members and 1 Guest are viewing this topic.

alphasqorner

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 100
  • Last login:September 07, 2017, 10:55:43 am
  • The machine took my quarter!!!
    • AlphasQorner
how to wire this panel with AKI?
« on: July 11, 2004, 05:14:43 am »
I will soon get my hands on a world series baseball type control panel and wanted to use the AKI board and am not sure how I will go about wiring it?  I'm kinda new at the whole analog control and potentiometer device aspect of control panelling so please be simple and condescending  ;).  

This what the control panel looks like:



Also, daveb, will your 49-way board ever allow 2 49 way joysticks to be hooked up to it?

Thanks guys!
« Last Edit: July 11, 2004, 05:16:03 am by alphasqorner »
Visit www.alphasqorner.net: Home of AlphasQontroller (CP with "coin door-ed" stand)

NoOne=NBA=

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2718
  • Last login:July 23, 2011, 08:59:16 am
  • Just Say No To Taito! -Nichibutsu
Re:how to wire this panel with AKI?
« Reply #1 on: July 11, 2004, 04:21:04 pm »
The 49-way boards can be hooked in parallel, to allow two 49-ways, and up to 20 buttons at the same time.

You just have to make sure to order two boards with different ID settings.

Minwah

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7662
  • Last login:January 18, 2019, 05:03:20 am
    • MAMEWAH
Re:how to wire this panel with AKI?
« Reply #2 on: July 12, 2004, 04:52:15 am »
It's kindof difficult to say without seeing the controls closer up...what controls are on there?  Looks like 1 analog stick on the right but what is the lever thing on the left?