Author Topic: Need a Mame Marquee? (Read 21609 times)

emdkay · « **Reply #40 on:** August 03, 2003, 03:09:00 am »

Quote from: Isometric Bacon on August 03, 2003, 02:35:28 am

Emdkay, I was planning on designing my own logo and CP Underlay (maybe even sideart!), and getting a local company to print it out for me. But since you seem to know what you're doing, and primarily print Marquee's and not all kind of junk, I might order some from you.

What i'd like to know, is how much would shipping cost to Australia?

Well you've come to the right place

Shipping to Australia for any amount of marquees is $11.70 via airmail. If side art or control panel underlays are to be included with the order, shipping will cost $18.55 via airmail (4-7 days delivery time).

Let me know whenever you're ready to submit some artwork or if you have any questions at all.

thanks,
Brent

Isometric Bacon · « **Reply #41 on:** August 03, 2003, 06:41:53 am »

Quote from: emdkay

Shipping to Australia for any amount of marquees is $11.70 via airmail. If side art or control panel underlays are to be included with the order, shipping will cost $18.55 via airmail (4-7 days delivery time).

Let me know whenever you're ready to submit some artwork or if you have any questions at all.

thanks,
Brent
Quote

Yikes. That's in USD right?
No offense or nothing, but I think i'll have to do it locally for the time being... the reason being costs.

A Marquee for $20 (approx AUD $40) is fine by me, particularly if it's as good quality as other people are saying they are, but with an extra $18 USD (around $36 AUD) for shipping on top of the other costs for the CP underlay/sideart... I will probably end up paying the same amount as I did for the materials I used to build the cabinet...

Ahh well, I guess i'll have to think this one over... Your sidearts come self adhesive right?

emdkay · « **Reply #42 on:** August 03, 2003, 02:52:23 pm »

I'm sorry for the high shipping prices, but I would be shipping to Australia after all.

No, the side art material is semi-gloss photo paper - similar to a poster. You can mount using spray/brush adhesive or clear contact paper.

Let me know if you decide to order anything!
thanks,
Brent

emdkay · « **Reply #43 on:** October 06, 2003, 02:59:08 am »

Two more pages of customer installations added this week!

http://www.emdkay.net/customers_installations_11.html
http://www.emdkay.net/customers_installations_12.html

DarkKobold · « **Reply #44 on:** October 09, 2003, 10:46:26 pm »

Emdkay: Do you have any form of front adhesive print, for a cocktail cab overlay?

Also, my cocktail is 32*22.... what would the esitmated price be?

emdkay · « **Reply #45 on:** October 10, 2003, 07:39:38 pm »

Quote from: DarkKobold on October 09, 2003, 10:46:26 pm

Emdkay: Do you have any form of front adhesive print, for a cocktail cab overlay?

Also, my cocktail is 32*22.... what would the esitmated price be?

Hey,

I don't work with large format adhesives just yet. I do expect to in the near future.

You can, however, get a 32" x 22" print on semi-gloss paper (similar to a poster) for $27.50 + 6.85 shipping.

Let me know if you're interested!
Brent

eightbit · « **Reply #46 on:** October 16, 2003, 10:53:26 am »

Quote from: tagnetti on July 31, 2003, 03:14:34 pm

EMDKAY can you reproduce this sideart for me at your max size? Birdtales has told me great things and that I would just need to adhere the sideart with some adhesive. Please let me know if it can be done and price.

Thanks

Tagnetti did you get emdkay to print it for you? If so how does it look? If you had a picture to post of it installed it would be great if you could post it.

Ovalblue · « **Reply #47 on:** October 17, 2003, 02:05:24 am »

I see on your website that you do arcade reproduction marquees. I need the Street Fighter II CE Marquee, however I need it in a specific size for my cabinet. Is this something that you can do?

Thanks!

john_mame · « **Reply #48 on:** October 17, 2003, 09:31:21 am »

I received my marquee from emdkay yesterday, just wanted to give some props for the excellent quality.

Keep up the good work!

emdkay · « **Reply #49 on:** October 20, 2003, 12:39:22 am »

Quote from: Ovalblue on October 17, 2003, 02:05:24 am

I see on your website that you do arcade reproduction marquees. I need the Street Fighter II CE Marquee, however I need it in a specific size for my cabinet. Is this something that you can do?

Thanks!

Hey,

It depends on the exact size you would need. I have sent you an email, so get back to me as soon as you can.

Brent

emdkay · « **Reply #50 on:** October 20, 2003, 12:41:16 am »

Quote from: john_mame on October 17, 2003, 09:31:21 am

I received my marquee from emdkay yesterday, just wanted to give some props for the excellent quality.

Keep up the good work!

Thanks John! Send in an installation shot if you'd like it to be featured on the web site.

Brent

emdkay · « **Reply #51 on:** January 31, 2004, 05:35:04 pm »

Quick FYI, Emdkay FTP accounts are available for anybody who would like to upload custom artwork for printing, or if you'd like to upload a photo of a marquee installation that you've previous purchased from us.

I haven't had much time to visit the forums lately and I don't have any other news to report, but I'd just like to bump this post! ^bump!

Brent

emdkay · « **Reply #52 on:** April 10, 2004, 01:28:33 pm »

I probably should have posted this earlier (3 months earlier!), but if anybody has the January issue of Maximum PC magazine, check out the "Hardcore Hardware" feature and see the Devastator II controller by Treyonics.

The Devastator II controller features artwork printed by Emdkay! Maximum PC gave the controller a 9.5 out of 10 - a "kick-ass" rating!

emdkay · « **Reply #53 on:** June 29, 2004, 02:04:19 am »

Just checking in...

Emdkay.net, in association with Xgaming.com, is extremely proud to support the Jerry Lewis' Muscular Dystrophy Association by donating our marquees for their August 2004 arcade & carnival held in Bellevue, Ohio.

More details to come...

http://www.mdausa.org/
http://www.xgaming.com/

emdkay · « **Reply #54 on:** July 28, 2004, 05:04:35 pm »

13 new customer installation photos have been added: http://www.emdkay.net/customers_installations3.html

Keep the photos coming, thanks!

emdkay · « **Reply #55 on:** August 25, 2004, 08:48:22 pm »

Sign up at freeiPods.com through our referral link and receive your marquee for FREE!*

View offer details on our home page: http://www.emdkay.net/

This offer is open to USA Emdkay customers past & present!

clanggedin · « **Reply #56 on:** August 26, 2004, 11:18:01 am »

Emdkay, I emailed you about 2 weeks ago regarding printing sideart and a marquee for my UAII cabinet. I have been out of town until now and didn't see an email response from you. If you sent me one could you please re-email (scott@utahautosales.com) it again or pm me?

Thanks,

Scott Peterson
(clanggedin)

emdkay · « **Reply #57 on:** August 26, 2004, 12:52:04 pm »

Quote from: clanggedin on August 26, 2004, 11:18:01 am

Emdkay, I emailed you about 2 weeks ago regarding printing sideart and a marquee for my UAII cabinet. I have been out of town until now and didn't see an email response from you. If you sent me one could you please re-email (scott@utahautosales.com) it again or pm me?

Thanks,

Scott Peterson
(clanggedin)

Hey Scott,

I sent a response on the 14th and it appears to have sent. In any case, I've re-sent the email message and have also sent it to you in a PM.

Regards,
Brent Bilis

clanggedin · « **Reply #58 on:** August 26, 2004, 05:23:47 pm »

Thanks, I got it

rchadd · « **Reply #59 on:** August 27, 2004, 03:49:50 pm »

i'm currently building a custom cocktail cab the dimensions of the top will be 36" x 25" can you print an underlay that large?

also whats the coverage like for large area of one colour? is there much variation in tone across the printout?

how much for such an underlay and shipping to uk?

ps. just seen the first example on your customer installations page...did you print out John Wayne also?

BLACK KNIGHT · « **Reply #60 on:** August 27, 2004, 09:31:57 pm »

I like that sideart

emdkay · « **Reply #61 on:** November 22, 2004, 09:02:35 pm »

Congratulations to William Shore and Colin Fein! Both have picked up a marquee of their choice from emdkay.net in the Arcadecontrols 2004 Holiday Giveaway! We'll be in touch.

emdkay · « **Reply #62 on:** January 17, 2005, 12:29:11 am »

Winter 2005 Sale - Marquees, $16.95 each!

Still Your ORIGINAL Source for High Quality Mame Marquees

http://www.emdkay.net

RayB · « **Reply #63 on:** January 17, 2005, 10:13:48 am »

I hope this sale lasts ALL winter. My marquee isn't designed yet

emdkay · « **Reply #64 on:** January 17, 2005, 05:44:57 pm »

As long as it's cold outside

wildatom · « **Reply #65 on:** January 20, 2005, 02:40:34 pm »

This place is the best. Very easy to deal with, the quality is the best and most of all the cheapest out there. I plan on ordering more as needed. Maybe I'll win or get free stuff with your referal! tell him I sent ya! wildatom@hotmail.com

Adam

emdkay · « **Reply #66 on:** April 05, 2005, 03:05:02 pm »

After three years, it's about time for an Emdkay Forum - please post comments / questions / thoughts, etc: http://emdkay.net/forums/

emdkay · « **Reply #67 on:** May 17, 2005, 12:56:49 pm »

Prices have dropped yet again on all marquees - all shapes and sizes!

EMDKAY - your ORIGINAL source for high quality mame marquees - is offering standard sized marquees for $14.95!

[/size]
This is the lowest price offered on our site to date. There is no definite expiration on this sale - but I hope to be able to keep prices this low for good.

Magnet_Eye · « **Reply #68 on:** May 17, 2005, 01:55:39 pm »

what is the quality & material of the repro marquees?

emdkay · « **Reply #69 on:** May 17, 2005, 02:05:27 pm »

Quote from: Magnet_Eye on May 17, 2005, 01:55:39 pm

what is the quality & material of the repro marquees?

The material is the same for all marquees - premium glossy photo paper. The quality on arcade reproduction marquees is 300dpi minimum - let me know if there's one in particular you need. Please use the contact form for the fastest reply: http://www.emdkay.net/contact_us.html

Magnet_Eye · « **Reply #70 on:** May 17, 2005, 02:14:03 pm »

ah..ok. thanks. We have to provide the plexi. that's what I really needed to know.

emdkay · « **Reply #71 on:** May 17, 2005, 02:27:32 pm »

Quote from: Magnet_Eye on May 17, 2005, 02:14:03 pm

ah..ok. thanks. We have to provide the plexi. that's what I really needed to know.

I offer polycarbonate lexan too if you need that:

Magnet_Eye · « **Reply #72 on:** May 17, 2005, 04:47:21 pm »

Quote from: emdkay on May 17, 2005, 02:27:32 pm

Quote from: Magnet_Eye on May 17, 2005, 02:14:03 pm
ah..ok. thanks. We have to provide the plexi. that's what I really needed to know.

I offer polycarbonate lexan too if you need that:

So we're talking around $30 after lexan, eh?

emdkay · « **Reply #73 on:** May 17, 2005, 04:50:09 pm »

Quote from: Magnet_Eye on May 17, 2005, 04:47:21 pm

Quote from: emdkay on May 17, 2005, 02:27:32 pm
Quote from: Magnet_Eye on May 17, 2005, 02:14:03 pm
ah..ok. thanks. We have to provide the plexi. that's what I really needed to know.

I offer polycarbonate lexan too if you need that:

So we're talking around $30 after lexan, eh?

You've got it..

$14.95 / marquee

$9.95 / two sheets of lexan

$4.50 / priority mail

$29.40


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news