Anyone selling PCB mounting feet?

[Hoagie_one]

I need 4, but will take more if anyone is selling in bulk.  w/ screws if possible please.

Thanks

[Apollo]

They are pretty easy to find any electronics parts shop should have them or you can use small rubber gromits.

[DrewKaree]

I need 4, but will take more if anyone is selling in bulk.  w/ screws if possible please.

Thanks

yeah, you're in MI, so there should be a CompUSA near you...dunno if Egghead is around you, but there's one....find a new/used computer sales shop, look in the yellow pages under used computer equipment.

[Hoagie_one]

no luck at comp USA or radioshack.

SO I ask again.  Anyone selling PCB feet>

[GameDork]

The RealBobRoberts does.....

[rchadd]

i'm in uk and need some also.

ultimarc sell them but postage on just the legs is unfeasible.

anyone know where to get them in the UK?

maplins don't sell them.

[Kremmit]

Can't lay your hands on any PCB Feet?  You need some BYOPCBF (Build Your Own Printed Circuit Board Feet)

Just get a tiny piece of plastic tubing and run a wood screw through it.  Get a screw with the top bit of the shaft smooth, so the threads don't bite into your PCB.  For the little piece of plastic tubing nylon bushings ought to do it, or mabye a rubber grommet, as suggested above.  Any plastic tubing the right inner diameter will do, you can cut the length to fit.  The picture says it better than I can:

[Hoagie_one]

pretty good idea there.

[Kremmit]

Glad I could help.

[JaffaMused]

...Just get a tiny piece of plastic tubing...

I used the shaft of a cheap plastic pen, cut to the desired length.  You can get all 4 stand-offs from one pen