Author Topic: laminate and t molding (Read 5396 times)

RCRDaleFan · « **on:** June 04, 2002, 02:15:57 pm »

what thickness mdf do you need to insure that the tmolding will cover both laminate and wood on the edge?

Phil

JustMichael · « **Reply #1 on:** June 04, 2002, 03:13:07 pm »

that would depend upon your t-molding. T-molding comes in many different sizes and styles.

PCC · « **Reply #2 on:** June 04, 2002, 03:30:41 pm »

A common wood thickness being used is 3/4". 13/16" T-molding is available for 3/4" stock with laminate. You can get it at http://www.t-molding.com/
.

RCRDaleFan · « **Reply #3 on:** June 04, 2002, 03:54:17 pm »

thanks again for the help everyone..

Phil


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news