Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Improve blocking/diagonal on Happ supers?  (Read 1801 times)

0 Members and 1 Guest are viewing this topic.

jaquer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 39
  • Last login:January 13, 2025, 10:20:49 pm
  • Geek of no Qualifications
Improve blocking/diagonal on Happ supers?
« on: July 28, 2002, 11:06:24 pm »
I've been playing with my new cab for about 4 days now and some of the people that have used it complain that both joysticks have poor registration on the left/down diagonal position (blocking down on fighting games).

I thought I remembered reading a post here a while ago on how to imrprove this but I can't find that post now.

Anyone have any idea how to do this?

TIA.
Logged
It's pronounced hacker.

x-wing

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 98
  • Last login:March 28, 2003, 10:40:37 pm
  • I Built My Own Arcade Controls!!
Re:Improve blocking/diagonal on Happ supers?
« Reply #1 on: July 28, 2002, 11:33:34 pm »
The diagonals on a Super are less responsive if you have the small side of the hourglass-shaped actuator toward the base.  If you are already set in 8-way mode (big end of the actuator toward the base), then check the levers on the microswitches.  The levers could be bent, causing them to be less responsive.
Logged
Pages: [1]
  
Go Up
« previous next »