Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Where should I start?  (Read 966 times)

0 Members and 1 Guest are viewing this topic.

GameDork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 346
  • Last login:March 06, 2011, 07:56:45 pm
  • I installed a DDR Pad on Tom Cruise!!
Where should I start?
« on: April 24, 2004, 04:47:06 pm »
     I have this Pacman cabinent I'm restoring. I have sanded all the gray paint from the artwork and I wanted to repaint this.

I have done more sanding since the pic was taken.

Any have an hints?

Do I mask off the graphics and do the yellow first or vice versa?
Roller or spray?
Do the small stuff with a artbrush?  
« Last Edit: April 24, 2004, 04:48:09 pm by GameDork »
Donkey Kong Hi Scores:

1) 169,600
2) 164,300
3) 134,000
4)116,800
5) LOL!

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
Re:Where should I start?
« Reply #1 on: April 24, 2004, 05:06:31 pm »
Roller the cabinet yellow.

As for the small stuff, I would PERSONALLY use a small brush, but that is because my airbrush skills aren't too hot.
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

spystyle

  • Thanks alot, now I have to build a time machine and warn myself yesterday!
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1430
  • Last login:February 23, 2021, 02:30:18 pm
Re:Where should I start?
« Reply #2 on: May 19, 2004, 02:49:22 pm »
Brushes and roller for sure, get brushes with nylon bristles and a small roller, paint from top to bottom. Take your time and you should be all set.

Dig it?
Craig

GameDork

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 346
  • Last login:March 06, 2011, 07:56:45 pm
  • I installed a DDR Pad on Tom Cruise!!
Re:Where should I start?
« Reply #3 on: May 19, 2004, 03:50:37 pm »
I have started now. I have masked off the graphics with acetate stuck on with 3M photo adhesive (This stuff rocks!) and am painting the yellow right now.

later, I will mask off parts at a time and just do that one piece ( i.e. the word "PAC" ) until I am finished.

I will post some pics here as soon as I get it cleaned up.

Thanks to everyone for your replies.

Brandon
Donkey Kong Hi Scores:

1) 169,600
2) 164,300
3) 134,000
4)116,800
5) LOL!