Author Topic: Quick Wiring Question ... PC power-up (Read 939 times)

General Zod · « **on:** April 20, 2004, 09:43:19 pm »

The picture below shows a jumper connected to the (PowerOn) pins of an Intel Desktop Board. This picture was taken quite a while ago, and unfortunately I wasn't doing the wiring job on this project!

Now for the life of me ... I cannot even wager a guess as to where the other end of these wires are. The setup was a JPAC, Intel MoBo, and a Std. Jamma Harness.

I know for a fact this was not wired to any sort of makeshift button, or actual power-on feature.

The entire setup ran a DOS system, and was powered using only 1 switch...monitor,pc, speakers and marquee.

Any ideas where this wire could have lead?

Thanks ...

General Zod · « **Reply #1 on:** April 20, 2004, 09:45:33 pm »

Just in case ..... here is a pic for the main power setup.

Thank you ,

Mike


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Quick Wiring Question ... PC power-up (Read 939 times)

General Zod

Quick Wiring Question ... PC power-up

General Zod

Re:Quick Wiring Question ... PC power-up