Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Coind Door Wiring, Question...  (Read 739 times)

0 Members and 1 Guest are viewing this topic.

Shredder

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:June 01, 2004, 01:10:15 pm
  • I'm a llama!
Coind Door Wiring, Question...
« on: April 15, 2004, 06:40:26 pm »
What wires do you need to startup free play?  One wire is a ground, and the other is a 'coin1' wire from the Jamma harness, correct?

I re-wired it to my free play start button, so I don't have to insert a quarter each time, and for some reason, nothing happens when I press it.  Could it be that the wire has to be setup a certain way in the Barrel Insulated Female Connectors?


SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re:Coind Door Wiring, Question...
« Reply #1 on: April 15, 2004, 06:41:57 pm »
Did you wire it to both the coin door AND this button?

Just the button alone?

Shredder

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:June 01, 2004, 01:10:15 pm
  • I'm a llama!
Re:Coind Door Wiring, Question...
« Reply #2 on: April 15, 2004, 06:48:26 pm »
Nope, just the button alone.  And just a quick update.  I don't know what I was doing wrong....m aby I had the wires mixed up or something, but I got it working again...

Now if only I can figure out why I'm not getting any video with My JRok connector.  Everything on  that is hooked up properly...

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re:Coind Door Wiring, Question...
« Reply #3 on: April 15, 2004, 07:39:27 pm »
Ah, maybe you had it wired to NC instead of NO.