Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Centipede CP dimensions  (Read 3534 times)

0 Members and 1 Guest are viewing this topic.

Hoopstar

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 43
  • Last login:June 12, 2004, 11:35:59 am
    • Hoopstars Garage
Centipede CP dimensions
« on: April 07, 2004, 07:47:54 am »
Just wondering if someone had the dimensions of the STOCK Centipede Control Panel  (ie. 'X' x 'Y')
Logged

Lance

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • Last login:December 08, 2008, 10:20:09 am
  • banned
    • arcade.spamrevenge.com
Re:Centipede CP dimensions
« Reply #1 on: April 07, 2004, 12:07:35 pm »
I know off hand that it is 23.75" wide, not sure of the height though
Logged

Larry Smith

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 53
  • Last login:September 01, 2004, 07:27:11 am
  • I'm a llama!
Re:Centipede CP dimensions
« Reply #2 on: April 07, 2004, 01:53:16 pm »
the top is 7", the front is 3" and the bottom is 5 5/8".
The measurments are appoximate because it is rounded from top to front and from front to bottom.
It is 23.75" wide.
Logged

Hoopstar

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 43
  • Last login:June 12, 2004, 11:35:59 am
    • Hoopstars Garage
Re:Centipede CP dimensions
« Reply #3 on: April 07, 2004, 05:50:45 pm »
Thanks very much guys..!!
Logged

OSCAR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1770
  • Last login:September 06, 2018, 11:31:53 pm
  • I think Bigfoot is blurry, that's the problem...
    • Oscar Controls
Re:Centipede CP dimensions
« Reply #4 on: April 07, 2004, 09:43:21 pm »
I traced mine and sketched it up in cad.  Below is a cross section of the cp showing the depth and how it is angled.  If you need any other dimensions, just let me know.


« Last Edit: April 07, 2004, 09:44:11 pm by OSCAR »
Logged

Jakobud

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1962
  • Last login:June 30, 2025, 02:20:39 pm
Re:Centipede CP dimensions
« Reply #5 on: April 08, 2004, 03:29:24 am »
Take a look at the Centipede Control Panel overlay I made in the artwork forum if you need to know placement of the buttons and trackball.
Logged
Pages: [1]
  
Go Up
« previous next »