Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: wingman warrior spinner help  (Read 971 times)

0 Members and 1 Guest are viewing this topic.

nikfaulkner

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17
  • Last login:November 19, 2006, 12:25:50 pm
wingman warrior spinner help
« on: March 17, 2004, 05:12:18 am »
hi all,

i've just bought a wingman warrior joystick from ebay for

crashwg

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3076
  • Last login:May 24, 2019, 11:01:05 am
Re:wingman warrior spinner help
« Reply #1 on: March 17, 2004, 06:33:22 am »
I'm not sure how much about this stick you know, but I came accross this and thought it might help...

In digital mode (using the serial port) you can use the spin control, hat switch and throttle if they are supported in a Windows 95/98 game.

Taken from here:http://www.joy-stick.net/reviews/other/classic/warrior.htm
If there's bees in the trap I'm catching em
By the thorax and abdomen
And sanding the stingers down to a rough quill
Then I dip em in ink, and I scribble a bit
But if it they wriggle then I tickle em until they hold still
Lemme say it again
In my land of pretend
I use bees as a mf'n pen