Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Picked up a new project 3-Koam Zback rough.  (Read 4183 times)

0 Members and 1 Guest are viewing this topic.

newtrix

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • Last login:March 26, 2025, 04:16:36 pm
    • Loving Family Seeking to Adopt
Picked up a new project 3-Koam Zback rough.
« on: March 20, 2025, 12:30:34 am »
Need ideas. Working Monitor Jamma harness power supply.  No PCB.  Not sure how to finish.  Replacement PCB seems too expensive.  Not sure iif Pandora can work on a real arcade monitor.  Was thinking of a Street Fighter I Championship theme.  I have done mame, Raspberry Pi, Pandora and 60 in 1.  How would you bring it back with a$300 max budget including graphics t-molding and paint?
Logged

jeremymtc

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 252
  • Last login:October 22, 2025, 08:45:06 am
Re: Picked up a new project 3-Koam Zback rough.
« Reply #1 on: March 20, 2025, 10:15:22 pm »
J-PAC and a cheap/free PC with VGA. Spend the rest on finishing materials.
Logged

newtrix

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • Last login:March 26, 2025, 04:16:36 pm
    • Loving Family Seeking to Adopt
Re: Picked up a new project 3-Koam Zback rough.
« Reply #2 on: March 21, 2025, 06:07:14 pm »
Did a little initial repair replaced the entire backside.
Logged

newtrix

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 165
  • Last login:March 26, 2025, 04:16:36 pm
    • Loving Family Seeking to Adopt
Re: Picked up a new project 3-Koam Zback rough.
« Reply #3 on: March 23, 2025, 11:13:19 pm »
And the front, I ended up cutting off the bottom  2 3/4 inches due to water damage. Then I built a pedestal like a Taito cabinet to restore the height.
Logged

jeremymtc

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 252
  • Last login:October 22, 2025, 08:45:06 am
Re: Picked up a new project 3-Koam Zback rough.
« Reply #4 on: March 27, 2025, 12:31:41 am »
Nice going on the repair work! Have you decided what's going into it yet?
Logged
Pages: [1]
  
Go Up
« previous next »